Page 1
Gas certified to Australian Standards For outdoor use only CS2134 CS2145 NOTE: ONLY USE ON A NON-COMBUSTIBLE SURFACE Gasmate ® is a registered trademark of Sitro Group Australia Pty Ltd www.gasmate.com.au Aber Living, N.Z www.gasmate.co.nz Important: Retain these instructions for future use 04052 09/20...
GENERAL WARNINGS DANGER WARNING • Read these instructions for use carefully. • During operation all surfaces will be extremely Familiarise yourself with the appliance hot and should not be touched or handled. before connecting it to its gas container. • Do not use the appliance if it is leaking, Keep these instructions for future reference.
Page 3
CHECKING FOR GAS LEAKS IMPORTANT • Check that all connections are tight and that • Use outdoors only. the gas cylinder connection has been tightened • Keep children away at all times. before you turn the cylinder gas valve on. •...
GENERAL INFORMATION DO NOT USE this appliance if it is leaking, damaged or GAS INSTALLATION CODES does not operate properly. • Appliance must be used in accordance with If you are unable to correct the leak by tightening the the installation requirements of your gas supply connections, turn off the gas and contact the supplier authority, immediately.
Page 5
PRODUCT DETAILS breezeways, or other enclosed areas. Your appliance is to be used OUTDOORS ONLY. The appliance is not CS2134 CS2145 intended to be installed in or on recreational vehicles Cast Iron Cast Iron...
CARE & MAINTENANCE During operation if it is noted that the burner flame is unstable, is changing colour from blue to yellow or has a distinct smell it is important that you contact SITRO Group for your local authorised gas appliance repairer for inspection.
PARTS LIST SINGLE BURNER Corner Trivets Frame & Burner Legs Mounting Screws Gas Valve x 16 with Primary Air Disc x 1 Screws x 2 DOUBLE BURNER Corner Trivets Frame & Burner Legs Mounting Screws Centre Trivets x 2 Gas Valve with Primary Air x 16 Disc &...
Page 8
ASSEMBLY PIC. 1 Review the contents of the package. Make sure all Centre Trivet (Twin Burner Only) listed components are included. 1. To attach centre trivet (PIC. 1) use supplied screw and nut assembly. Attach legs and corner trivets to frame using supplied screws, taking care to align the internal thread in leg assembly (PIC.
CLOSE TO THE BURNER TUBE OPENING PIC. 4 PIC. 4 GENERAL ASSEMBLY CONNECTING & DISCONNECTING TO GAS SOURCE Familiarise yourself with the general information and safety guidelines located at the front of this manual. CONNECTION 1. Gas cylinder is filled. A sloshing sound will be heard when shaken.
Page 10
TURNING THE APPLIANCE OFF PIC. 8 If the appliance is no longer to be used and to reduce the risk of blocked gas jets caused by excess gas being left in the hose, all remaining gas must be expelled from the hose assembly.
Page 11
SAFE APPLIANCE LOCATIONS This appliance shall only be used in an above ground open-air situation with natural ventilation, without stagnant areas, where gas leakage and products of combustion are rapidly dispersed by wind and natural convection. Only use on a Non-combustible surface. Any enclosure in which the appliance is used shall comply with the following: An enclosure with walls on all sides, but at least one permanent opening at ground level and no overhead cover.
Need help?
Do you have a question about the CS2134 and is the answer not in the manual?
Questions and answers