Table of Contents
Advertisement
Quick Links
Operation Manual
AOYUE PreHeating Station INT853A
90853A
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Table of Contents
Summary of Contents for aoyue INT853A
- Page 1 Operation Manual AOYUE PreHeating Station INT853A 90853A Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
- Page 2 To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods. Returns Department WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler E-mail: service@wiltec.info Tel:+49 2403 55592-0 Fax: +49 2403 55592-15 © by WilTec Wildanger Technik GmbH Item 90853A Page 2 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 3 Product description and information • The IR preheating station INT853A is a reworking device using infrared (IR) heating technology with a multifunctional circuit board holder. It is designed for reworking double-sided print circuit boards (PCBs) with various technologies to be soldered with or without lead.
- Page 4 Read all safety warnings and instructions. Failure to follow the safety instructions and instructions can result in electric shock, fire and/or serious injury. Keep all safety notices and instructions for future use. © by WilTec Wildanger Technik GmbH Item 90853A Page 4 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 5 Potentially harmful fumes are generated during soldering. Only solder in a well-ventilated work area to avoid harmful concentrations. • Do not make any structural changes to the device. © by WilTec Wildanger Technik GmbH Item 90853A Page 5 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 6 Explanation of the control panel № Name № Name Temperature display Temperature regulator Heating display Temperature scale switch © by WilTec Wildanger Technik GmbH Item 90853A Page 6 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 7 Reworking can begin as soon as the set temperature is reached and the heating display starts to flash. • After finishing reworking, switch the main switch to off. © by WilTec Wildanger Technik GmbH Item 90853A Page 7 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 8 The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 90853A Page 8 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
Need help?
Do you have a question about the INT853A and is the answer not in the manual?
Questions and answers