Advertisement
Quick Links
Model No.
Setting Range
Screen Title
( )= Initial Value
3.6
(No specified
Value)
Calibration for
XXXX
Temperature
H C A.t
Parameter
3.7
XXXX
Exit to Mail
H C A.t
Screen
Note: Press
Key to exit in betwen the function
L L L L
Implies that Process Value is LOW
L L L L
H H H H
Implies that Process Value is HIGH
H H H H
O P E n
Implies that NO Input Signal
O P E n
Function
Calibration of Span setting for
Humidity Parameter (20.00mA)
Note: Requires Stable & accurate
Current Source to perform this
function
Doc no: HTAIPL/MAN/CONT-22
Page 8 of 8
Instruction Manual for
HUMIDITY / TEMPERATURE
CONTROLLER
RH/TEMP . CONTROLLER
MODEL : EQ-TRH101 4S
HTA INSTRUMENTATION (P) LTD.,
An ISO 9001: 2015 Certified Company & NABL Accredited Calibration Laboratory as per ISO/IEC 17025: 2005
Your One Stop for Instrumentation Calibration & Service
# 73, Ramachandra Agrahara, Near T.R. Mills, Chamarajpet, Bangalore - 560018, INDIA
Phone: 080-26749750, 26759253, 26751379, 26751192, Fax: 080-26740681 Website : www.htaipl.com E-mail : sales@htaipl.com
%RH
°C
TRH101-4S
JAS-ANZ
R
ISO 9001:2015 CERTIFIED
Certificate No. IQSC201710015
Doc no: HTAIPL/MAN/CONT-22
Page 1 of 7
Advertisement
Summary of Contents for HTA Instrumentation Equinox EQ-TRH101 4S
- Page 1 JAS-ANZ ISO 9001:2015 CERTIFIED Certificate No. IQSC201710015 HTA INSTRUMENTATION (P) LTD., An ISO 9001: 2015 Certified Company & NABL Accredited Calibration Laboratory as per ISO/IEC 17025: 2005 Your One Stop for Instrumentation Calibration & Service # 73, Ramachandra Agrahara, Near T.R. Mills, Chamarajpet, Bangalore - 560018, INDIA Phone: 080-26749750, 26759253, 26751379, 26751192, Fax: 080-26740681 Website : www.htaipl.com E-mail : sales@htaipl.com...
- Page 2 Introduction Model No. Setting Range Function Screen Title ( )= Initial Value This Microcontroller-based instrument is basically a Humidity – 2-14 Temperature Controller, which accepts a 4~20mA input from RH - 0 - 10 0 to 9 No Function Temp. Transmitter and displays the corresponding Parameters in 10 - To Set the Controller to Default to the dual display as per configuration.
- Page 3 Model No. Setting Range Front Panel Detail: Function Screen Title ( )= Initial Value 0 – 4 HUMIDITY/TEMPERATURE CONTROLLER 0 -- No Output 1 -- De-Humidification Function O/P–1 Outpuy Mode 2 -- Humidification Function O/P–2 01 0 . 0 01 0 . 0 H.m d 2 for Humidity 1.
- Page 4 Programming Procedure: Model No. Setting Range Function Screen Title ( )= Initial Value Level-1(user level) 1-10 0 to 99min Time delay for the output to Pressing the key once on the basic screen will proceed to the user activate after reaching the set value level parameter (Level 1) Delay for (Delay Mode set in Power on delay)
Need help?
Do you have a question about the Equinox EQ-TRH101 4S and is the answer not in the manual?
Questions and answers