Samsung QN49Q6FNAF Service Manual page 52

3. Disassembly and Reassemble
Description & Screws
Remove the DC VSS-PD BOARD. (Decomposition
order : -
1 2
• 82"
• Gently lift up (Top Left corner) to release
2
the lock and Slide Board to the Right.
Locking
NOTE
Before Removing SMPS Board
1
• You have to discharge the SMPS by using
service JIG.
If LED ON
9
completed.
• Measurement point
LED ON
<Before discharging>
10
Completed the disassembly.
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
3-8
)
Fixing Hole
: LED OFF, discharge is
LED OFF
<After discharging>
Picture Description
Slide to the right to release the board
Locking
2
Bottom chassis Guide Fixing Hole
Measurement point
1