NexLink CARBON 15 Series Quick Start Manual

QUICK START GUIDE
1
Install the Battery Pack
Install the battery pack if it has not been installed in your computer.
• Carefully place the computer upside down.
• Make sure that the battery security lock is in the unlock (
• Fit the battery pack into its compartment and slide the security lock to the
lock ( ) position.
3
Power Up
• Open the top cover by lifting up the cover.
All manuals and user guides at all-guides.com
2
) position.
This guide provides step-by-step instructions
for a quick setup of your notebook computer.
Connect AC Power
The first time you use your computer,
use the AC adapter. This will allow the
battery pack to fully charge.
• Plug the DC cord of the AC adapter
to the power connector on the
computer.
• Plug the female end of the AC power
cord into the AC adapter and the
male end into an electrical outlet.
1
2
• Press the power button to power
up. An operating system such as
®
Windows should start.
The Battery Charge Indicator ( ) on
the computer glows red to indicate that
charging is in progress and lights green
when the battery is fully charged.