progressive automations RT-14 User Manual page 2

Dimensions
COM
5.50"
2.20"
Operational Procedure
Connect the receiver to the FLT control box. To pair the remote, press and hold the "connect" button located in
the pinhole on the receiver. While holding the connect button, press both the
until the light on the remote turns on.
Remote Functionality
The RT-14 can toggled between momentary and non-momentary functionality. In order to do this you must
hold the COM button down for 10s.
Non-Momentary: Press the
or you can press any button to stop it's movement cycle. Press the
keep moving until it reaches lower limit or you can press any button to stop it's movement cycle.
Momentary: Press and hold the
movement cycle. Press and hold the
movement cycle.
2.17"
0.80"
button to raise/extend your unit. Unit will keep moving until it reaches upper limit
button to raise/extend your unit, release the button to stop it's
button to lower/retract your unit, release the button to stop it's
Ø0.07"
Ø0.13"
1.97"
0.87"
1.97"
and
button to lower/retract your unit. Unit will
1.08"
Cat5 Wire,
7.2" Long
2.81"
button on the remote