Summary of Contents for Fast Aqua M40
- Page 1 Operating Manual Aqua M40 F.A.S.T GmbH Operating Manual AquaM40 (Bluetooth version)
-
Page 2: Table Of Contents
Operating Manual Aqua M40 F.A.S.T GmbH Table of content 1 Safety instruction ............ 2 2 Intended use: ............2 3 Scope of delivery and overview ......3 4 Start-up and operation ..........4 5 Activating the Bluetooth connection ...... 7 6 Technical data ............ -
Page 3: Safety Instruction
Operating Manual Aqua M40 F.A.S.T GmbH This measuring device has been designed according to state-of-the-art technology and meets all relevant requirements of the applicable European and national guidelines. Conformity has been proved, and the corresponding declarations and documentation have been filed with the manufacturer. -
Page 4: Scope Of Delivery And Overview
Operating Manual Aqua M40 F.A.S.T GmbH Scope of delivery and overview Central unit with sensor Bluetooth headphones Tripod Pot magnet Charging unit 220 volt with USB connector Charging unit 12 volt with USB connector Battery charger leads USB for headphones... -
Page 5: Start-Up And Operation
Central unit 4.1.1 Switch on For switching the Aqua M40 central unit on, press the On/Off button short until the battery- LED begins to glow. 4.1.2 Switch off Keep the ON/OFF key pressed for approximately 3 seconds. The level indicator will indicate ”Maximum value“. - Page 6 Operating Manual Aqua M40 F.A.S.T GmbH high frequency low frequency All frequencies lighting The Noise Level LEDs indicate the intensity of the noise acquired. Please note that a leakage- borne noise does not always or necessarily lead to a full-scale indication of the Level LEDs.
- Page 7 Operating Manual Aqua M40 F.A.S.T GmbH * Push-button or input not relevant for measurement procedure 4.2.1 Switch on Keep the Power push-button [5] pressed for about 4 seconds. The blue LED will flash, and the headphones will be switched on.
-
Page 8: Activating The Bluetooth Connection
The Bluetooth connection between the Aqua M40 and the Marmitek Boom Boom 560 needs to be established as following. First switch on Aqua M40 and then press and hold the power button on the headphone until the Bluetooth-LED on the Aqua M40 indicates connection (LED is lighting). -
Page 9: Technical Data
Operating Manual Aqua M40 F.A.S.T GmbH Technical data Headphone Bluetooth frequency 2.402-2.480GHz Bluetooth version V2.1+EDR Supported Bluetooth profiles A2DP, AVRCP, HSP, HFP Supported codecs SBC (subband codec) Support Multiple Pair up to 8 devices Range up to 10 metres/11 yards on open field Battery Li-ion 3.7v... -
Page 10: Relevant Information On Environmental Protection
Operating Manual Aqua M40 F.A.S.T GmbH Relevant information on environmental protection for customers located in the European Union European Guideline 2002/96/EC claims that any technical equipment which is marked with this symbol either directly on the equipment or on its package must not be disposed of with unsorted municipal waste.