Download Print this page

Advertisement

Quick Links

01865 767676
sales@unicol.com
www.unicol.com
PSK
Screen Size: N/A
Guide Max. Weight: N/A
Revised 11/12/20
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any
spring loaded parts. Before installing, make sure that the supporting surface will support five times the
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also
layout all components to ensure that you have all of the required parts before proceeding (see BOM list
on following page). Use of this product for anything other than its specified use may result in failure or
personal injury. This product is intended for indoor use only. We recommend using a qualified trades
person for installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com

Advertisement

loading

Summary of Contents for Unicol PSK

  • Page 1 This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676 or email: sales@unicol.com...
  • Page 2 01865 767676 sales@unicol.com www.unicol.com TOOLS REQUIRED INSTALLERS REQUIRED COMPONENTS DESCRIPTION Securing Ferrules Brackets Keys Barrel Lock Tetherloc Cable with 1x Securing Ferrule and 1x Retaining Washer Revised 11/12/20...
  • Page 3 01865 767676 sales@unicol.com www.unicol.com UNIVERSAL MOUNT FIXING (PZX/PZW) DEDICATED MOUNT FIXING (PLX/PLW) Place the top two fixing screws (a) that hold the Place the top two fixing screws (a) that hold the mount to the screen through the two ferrules (1) mount to the screen through the two ferrules (1) and tighten.