Advertisement
Quick Links
01865 767676
sales@unicol.com
www.unicol.com
TVV1 / TVL1 / TVT1 / TVB1
Screen Size: 15-40"
Guide Max. Weight: 15kg
Revised 15/12/20
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any
spring loaded parts. Before installing, make sure that the supporting surface will support five times the
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also
layout all components to ensure that you have all of the required parts before proceeding (see BOM list
on following page). Use of this product for anything other than its specified use may result in failure or
personal injury. This product is intended for indoor use only. We recommend using a qualified trades
person for installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Advertisement
Related Manuals for Unicol TVV1
Summary of Contents for Unicol TVV1
- Page 1 This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676 or email: sales@unicol.com...
- Page 2 01865 767676 sales@unicol.com www.unicol.com TOOLS REQUIRED INSTALLERS REQUIRED 3/16th Allen Key 5mm Allen Key COMPONENTS DESCRIPTION 1000mm Column Single Column VESA Mount Tevella Base Column Support Ring Alternative Bases Revised 15/12/20...
- Page 3 01865 767676 sales@unicol.com www.unicol.com STEP 1 STEP 2 Check the jaws of the column grip, if you can push Place the column support ring over the crocodile them together to fit a column over, ignore this step. lug with the straight edge facing the rear of the If you can’t, you will need to loosen the screw on...
- Page 4 01865 767676 sales@unicol.com www.unicol.com STEP 6 STEP 5 Slide the mount and adapter over the column and Loosen the screws at the side of the mount to set position at the desired height. When happy, tighten the angle of the screen. Once in position, retighten the grub screw to secure the mount and screen into the screws.