Download Print this page

Vive Comfort TP-Z-ROSW User Manual

Outdoor sensor

Advertisement

Quick Links

C O M F O R T
TP-Z-ROSW
VIVE Comfort
P.O. Box 3377
Spring eld, MO 65804
Toll-Free: 1-800-776-1635 Web: www.vivecomfort.com
Hours of Operation: M-F 9AM - 6PM Eastern
This manual covers the
following models:
• TP-Z-ROSW (Requires Z955W or T955WH)
Congratulations on purchasing
our Wireless System.
This remote sensor was designed to the
highest reliability and ease of use standards.
Thank you for choosing our quality products.
Table of Contents
Installing Batteries
Establishing Communication
Installation Tips
Speci cations & Warranty
® U.S. Registered Trademark. Patents pending.
Copyright © 2014. All rights reserved.
OUTDOOR SENSOR & USER GUIDE
TM
Page
2
3
4
5
Caution:
Equipment damage hazard
Do not operate the cooling
system if the outdoor
temperature is below 50˚ F
(10˚ C) to prevent possible
compressor damage.
A trained, experienced technician
must install this product.
Carefully read these instructions. You
could damage this product or cause a
hazardous condition if you fail to follow
these instructions.
1
Rev. 1407

Advertisement

loading
Need help?

Need help?

Do you have a question about the TP-Z-ROSW and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vive Comfort TP-Z-ROSW

  • Page 1 This manual covers the could damage this product or cause a following models: hazardous condition if you fail to follow • TP-Z-ROSW (Requires Z955W or T955WH) these instructions. Congratulations on purchasing our Wireless System. This remote sensor was designed to the highest reliability and ease of use standards.
  • Page 2 INSTALLING BATTERIES Installing Batteries To install 2 AA batteries remove the three screws shown in the diagram. One in the middle of the inside cover box, and two on either side of the cover box. Note about low batteries: When the outdoor battery needs to be changed the Master Thermostat will ash LOW BAT OUTDOOR as seen on the left.
  • Page 3 ESTABLISHING COMMUNICATION Remember Inside of Sensor FSK/ ASK Switch Our Wireless System contains selectable wireless communication. Each component has a jumper switch labeled FSK and ASK. Default setting: FSK. All components must be set to the same position for wireless communication. This selectable communication option is available to you in case you have a device you are pairing with that only has the ASK option.
  • Page 4 INSTALLATION TIPS Wireless Range Range between the Remote Sensor and the Master Thermostat is approximately100 feet with no obstructions and approximately 50 feet in standard residential metal, brick, and concrete construction. Mounting the Outdoor Remote Sensor For vertical mount put one screw top and one screw bottom.
  • Page 5 Every 5 minutes Frequency 916 MHz Warranty Registration: Name: ____________________________ Thermostat Model: _____________________ Address: ____________________________ Date Installed: _____________________ ____________________________ Complete form and mail to: City: ____________________________ Thermostat Warranty Registration State: ____________________________ VIVE Comfort Zip: _____________________ P.O. Box 3377 Spring eld, MO 65804...