Do you have a question about the IQ Bar and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Aqualife IQ Bar
Page 1
718-236-7000 Countertop IQ Bar Water Dispenser Instruction Manual Variety of Colors to match interior design. Please read this manual carefully before Using!
CONTENT 1. Brief Introduction. (1). Brief Introduction of the Appearance (2). Touch panel Introduction 2. Technical Parameters 3. Installation (1). Overview (2). Water Supply connection 4. Operation (1). nitially connected to electrical source (2). Attentions before using for first time (3).
(2). Touch Panel Introduction Day - Month - Year Child Lock status icon UV light status icon Hot key and select key Heating and hot water temperature icon Extra-hot Key...
Return key and child lock button Mixed water keys Logo Clock Automatic Switcher icon Power-saving mode icon Cold water key and Select key 14. Cooling and cold water temp icon Set key and Enter key One cup of water key and select key Water outlet indicator light 2.
Page 6
Item Specification Parameter Electricity features Rated Voltage/Frequency 230 VAC/50 Hz 1700 W Rated Power* Rated Current* Heating system Rated Heating Power 1500 W Heating Capability 4G/H Hot Water Temperature 194-204 F (Adjustable) Cooling system Rated Cooling Power 138 W 0.8A Rated Cooling Current Cooling Capability 1.5G/H...
Page 7
(2). Unit Electric Wiring: Note: Our company reserves the right to change any product specifications and parameters without notice and without incurring any obligations or liabilities for such changes.
3. Unit Installation (1). Overview Please install the machine in a place of use , keep the unit 4" away from the wall and leave enough space for both sides of the unit. In order to insure the water quality, please use our company original settings. (2).
Please remove the cover of the inlet water connector and block head(first remove the Claw)(Picture 3),and insert the water pipe to inlet (first insert water pipe and install the claw(Picture 4)(Picture 5), Picture 3 Picture 4 Picture 5 4. Operation (1).
Page 10
(2). Attention! Before Using: First time to use the unit, please check all water pipe fittings and valve connections, making sure they are well connected. After tuning on the unit, firstly please release 3-4 Gal water, and then push the hot and cold buttons to see if there’s water running out.
Page 11
(3). Getting Water Operation: Hot water When setting with the child lock, firstly touch ,then touch ① can get the hot water after 3 seconds, touch any press key to stop the water。 When setting without a child lock,firstly touch ,then touch ②...
Page 12
Warm Water: Touch can get mixed water, touch any press key to stop the water. Get One Cup of Water Firstly touch , touch can get one cup of hot or cold water.
Page 13
(4). Parameter Settings A. Enter the Setting Interface ① Press on the setting interface, follow to the interface prompts. Setting interface including temperature settings, water settings, time and date settings, energy saving mode, child lock settings, filters and UV change settings, language settings, ring settings and restore factory settings ②...
Page 14
C. Water Quantity Settings Select water quantity setting, enter into the water regulation interface, and follow the prompts to set parameters, as follows:...
Page 15
D. Time Settings (year - month - day) Select Calendar settings, enter into the time adjustment interface, follow the prompts to set the parameters, as follows: Then press to save parameters E. Energy Saving Mode Select energy-saving mode, enter into power saving mode adjustment interface, follow the prompts to set parameters, as follows: ①...
Page 16
② Automatic On/Off Switch In standby mode, it shows as below: Press any key...
Page 17
F. Child Lock Settings Select Child Lock setting item, enter into the child lock adjustment interface, and follow the prompts to set parameters, as follows: G. Filter / UV Maintenance Settings Select Filter / UV maintenance setting item, enter into the filter / UV maintenance adjustment interface, and follow the prompts to set parameters, as follows: ①...
Page 18
H. Language Settings I. Ring Settings J. Restore Factory Settings...
Page 19
5. Maintenance And Replacement of Machine Parts (1). Replacement A. Filter maintenance Filter should be replaced every 6 months (about 500 Gal of water), when the filter is reaching the lifetime, the unit will remind you to replace the filter Remove the decoration tray OPEN-rotate to replace the filter (anticlockwise change) CLOSE-install the filter (clockwise installation)
Page 20
Enter into the setting mode after replacing the filter - filter / UV maintenance - filters - filter replacement - Confirm B. UV Maintenance UV should be replaced once a year, when the UV lamp is reaching the lifetime, the unit will remind you to replace the UV lamp Check the accessory of the unit, you will find a UV replacement instrument, put it into the UV hole, latch release and rotation UV as counter clockwise and remove the UV light...
Page 21
When finished UV lamp replacement, please enter into setting mode – Filter / UV-UV-replace maintenance of UV-recognized. (2). Cleaning Panels Clean unit with a soft cloth dipped in warm water or soapy water and other neutral detergent scrub gentl y. Touch panel, the tray can be used with the shank of dry soft cloth.
6. Attentions This machine is for indoor use, Please avoid it from ◎ ◎ ◎ ◎ direct sunlight. Placing it next to flammable materials prohibited, please stay away from expensive high-end appliances placed (in case splash water), do not wash the unit or immerse the unit into water! ◎...
The machine maintenance and service by professionals, ◎ ◎ ◎ ◎ the company and dealers are not liable for any improper use or neglect as a result of direct or indirect responsibility for the loss If a long vacation or business trip without the use ◎...
Page 24
·Heating system is not open ·Turn the heating switch ·excessive water use ·Test again after 10 minutes water ·The machine is in power ·Follow the prompts to open the system saving mode restore function within 3 minutes ·Chilled water temperature ·Check the water temperature settings set too high cold...
Need help?
Do you have a question about the IQ Bar and is the answer not in the manual?
Questions and answers