ECS DA'SEL PREFESSIONAL DS700 Installation And Commissioning Instructions

SPECIFICATION:

Power Sourcing: 230V 50Hz (UK & Europe)
Maximum Recommended Mounting Height:
5 mtr
Switch Capacity: 10 Amps
Incandescent Lamps: 1500W max (at 230V)
Terminal Capacity: 2 x 1.5mm or 1 x 2.5mm
Weight: 148g
Time-Delay: 5, 10 or 15 mins
Power-up Condition: select ON or OFF
Detector Range:
adjustable - see installation notes

TECHNICAL/WIRING DETAILS:

Switching capacity 10 Amps.
Incandescent lamps: 1500W max.
For use on 230V AC supplies only.

Important Additional Notes

1. A means for disconnection must be
incorporated in the fixed wiring in
accordance with the current wiring
regulations.
2. This equipment switches lights
no more frequently than would
a responsible human occupant.
However, manufacturers of some
DA'SEL, DA'SEL BASIC, DA'SEL STANDARD and DA'SEL PROFESSIONAL
are registered trademarks of Energy Conservation Solutions.
* 1 year warranty on DA'SEL BASIC, 2 Years on DA'SEL STANDARD and 5 years on DA'SEL PROFESSIONAL
Range Reduction:
adjustable - see installation notes
Ultrasonic Frequency:
adjustable 50 to 5000 lux
Semi-Flush Fixing: requires 76mm hole
to be drilled in ceiling tile
IP Rating: 3X
Operating Temperature: 0°C to 40°C
lighting types (e.g. '2D' luminaires)
may specify a maximum number of
switching cycles in order to achieve a
predicted lamp life. Please check with
the manufacturer of the luminaires to
ensure that they are compatible with
automatic controls in this respect.
PROFESSIONAL
Installation AND
Commissioning INSTRUCTIONS
The DS700 Ultrasonic sensor uses a
specially developed ultrasonic radar
to monitor the controlled space for
movement. This radar is sensitive
Energy Conservation Solutions Pty Ltd
Unit 9, 103 Lewis Road, Knoxfield Vic 3180 ı Ph 1300 306 136
www.ecs.net.au
DS700 PROFESSIONAL
Ultrasonic sensor
enough to respond to even very
small movements thus ensuring that
lights are sustained whenever the
controlled space is occupied.
MS700P