Download Print this page

Zoox Intelligent ATO User Manual

Auto tap water system

Advertisement

Quick Links

Intelligent ATO
Auto Tap Water System
User Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the Intelligent ATO and is the answer not in the manual?

Questions and answers

Summary of Contents for Zoox Intelligent ATO

  • Page 1 Intelligent ATO Auto Tap Water System User Manual...
  • Page 2 Thank you for purchasing Intelligent ATO. Please read this instruction manual carefully and understand the usage and structure before use. After reading, keep it in a place where you can read it again at any time. Safety Guide The precautions are for the safe and correct use of the product and to prevent harm or damage to the user or other people.
  • Page 3: Safety Guide

    SAFETY GUIDE HANDLING OF POWER PLUG, POWER CORD & SOCKET WARNING Unplug the power adapter when putting your hands in the aquarium or When pulling out the power adapter performing maintenance from the outlet, hold the power adapter first, then pull it out. It may cause electic shock.
  • Page 4 ●Specification Sensor body size:27×23mm Attached hose:2m With sensor cover:27×31mm Maximum lift: <2m Magnet compatible thickness: 〜15mm Power consumption:(Pump) :4w Hose fixing clamp compatible thickness: 〜15mm Maximum flow rate:(Pump) :280L/h 23mm 31mm 27mm 27mm Sensor body Magnet Sensor cover ●Before use Before using the product, please check and make sure that there are no breaks or cracks.
  • Page 5 Attach the sensor body to the desired height of the water tank or sump (water supply start water level) with a magnet so that the cord faces directly upward. The water level at the time of installation (current water level) must be lower than the height of the water supply start water level to be set.
  • Page 6 The order of connecting cords and turning on the power is very important.Note that if you connect in Attention a different order, the settings will not work properly. ①Connect the sensor cord to the power adapter cord. ② Insert the power adapter into the outlet and turn on the power. ③...
  • Page 7 ●Indicator light display Intelligent ATO displays the operating status using a lamp the inside of the sensor body. Green light on At normal water level Green light off High level sensor line is working. Activated during initial setup. All light off...
  • Page 8 ZOOX Aquarium Ltd. is, incidental result of the use and development of this product, consequential damages, or incidental generated by infringement of this guarantee, not responsible for consequential damages.