Advertisement
4.2. USING THE THERMOCOUPLE (S)
1. Plug the thermocouple(s) into the T1 input connector(s).
2. Press
to turn on the thermometer. After 1 second the thermometer
displays the first reading. If no thermocouple is plugged into the
selected input or the thermocouple is "open," the display shows"- - - -".
4.3. CHANGING SETUP OPTIONS
Use Setup to change offset, sleep mode settings. The thermometer stores
the settings in its memory.
4.4. SETUP OPTIONS
Option
Type
Offset
Sleep Mode SLP On
4.5. ENTERING OR EXITING SETUP
When the thermometer is in Setup mode, the display shows SETUP.
Press
to start or exit Setup.
4.6. CHANGING SETUP OPTION
1. Press
or
2. Press
to indicate that you want to change this setting.
3. Press
or
4. Press
to store the new setting in memory.
Notes: Setup is disabled in MAX MIN mode .
5. OFFSET
The primary display shows the temperature plus the offset and the
secondary display shows the offset. You can store individual offsets for T1.
When the thermometer is in Setup mode, the display shows SETUP.
Press
or
to indicate the T1 or T2 offset in Secondary Display. Press
setting you want to use appears on the display (fig.1). Press
the new setting in memory.
6
Menu item
Settings
TYPE
K or J
OFFSET
T1
(sleep mode on) or OFF
(sleep mode off)
to scroll to the setup option you want to change.
until the setting you want to use appears on the display.
to scroll to the T1 or T2 offset setup option page. Press
or
until the
to store
Advertisement
