Table of Contents
Advertisement
Door Reversal
Instructions
(continued)
G05I0113
9. Turn center hinge upside down and
secure to cabinet as shown, using the
screws which are in the new holes. Install
refrigerator door on lower hinge pin.
Align door with edge of cabinet. Hold
the door on front of cabinet.
12. Before replacing the toe grille,
remove the plastic grill plug from the toe
grille. Rotate the grill plug so it fits on the
opposite side of the toe grill. Replace toe
grille.
10. Place original washer over hole in
refrigerator door and line up hole in
center hinge. Insert hinge pin through
both holes. Place washer on hinge pin,
then position freezer door on center
hinge.
11
G05I0070
11. Assemble upper hinge to top of
cabinet and door. Use opposite set of
holes. Do not completely tighten
screws.
Check door alignment. Space between
door and cabinet should be 3/4" at top
hinge, the width of an ordinary penny.
Return food, bottles, and other articles
to doors. Additional adjustment may be
necessary after loading the door
shelves. Turn the refrigerator control
on and to the previous setting.
Advertisement
Table of Contents
