Table of Contents
Advertisement
Error Messages
Display
Err Limit
You are attempting to record more than 999
measures.
Err Mem Full
You are attempting a recording that exceeds the
allowable per-song limit.
Err DataFull
You are attempting to record more than 5 multi-track
songs.
Err No Media
The USB flash drive is not plugged correctly into the
cr USB Type A port.
The USB flash drive was removed while some
operation was in progress.
The USB flash drive is write-protected.
The USB flash drive is protected by anti-virus
software.
Err No File
There is no loadable or playable file in the MUSICDAT
folder.
Err No Data
You are selecting a user data item that does not have
any data stored to it.
Err ReadOnly
A read-only file with the same name you are trying to
use is already stored on USB flash drive.
Err MediaFul
There is not enough space available on the USB flash
drive.
Err NotSMF01
You are attempting to play back SMF Format 2 song
data.
Err Large Sz
The SMF file on the USB flash drive cannot be played
because it is too big
The data you are trying to import cannot be imported
because it is too big.
Err WrongDat
The USB flash drive data is corrupted.
USB flash drive contains data that is not supported by
this Digital Piano.
Err Format
The USB flash drive format is not compatible with this
Digital Piano.
USB flash drive memory is corrupted.
Err No Adptr
A Wireless MIDI & audio adaptor is not plugged into
the cr USB Type A port.
Cause
Action
Make your recordings up to 999 measures long.
Keep song recordings with the allowable per-song
limit.
Delete some of the songs in memory.
Correctly plug the USB flash drive into the cr USB
Type A port.
Do not remove the USB flash drive while any operation
is in progress.
Write-enable the USB flash drive.
Use a USB flash drive that is not protected by anti-
virus software.
Move the file you want to load into the "MUSICDAT"
folder or the file you want to play into the "MUSICDAT"
folder (page EN-53).
Select a user data item that has data stored to it.
• Change the name and then save the new data.
• Remove the read-only attribute from the existing
USB flash drive file and overwrite it with the new
data.
• Use a different USB flash drive.
Delete some of the files on the USB flash drive to
make room for new data or use a different USB flash
drive.
Playback of SMF Format 0 or Format 1 only is
supported.
Playback of SMF files up to approximately 320 KB in
size is supported.
The maximum data size (per data item) when loading
data into Digital Piano memory is shown below.
Rhythms: Approximately 64 KB
–
–
• Use a computer or other device to change the USB
flash drive format to something that is compatible
with the Digital Piano (page EN-50).
• Use a different USB flash drive.
Use a different USB flash drive.
Plug a Wireless MIDI & audio adaptor into the
cr USB Type A port.
Reference
EN-63
Advertisement
Table of Contents
