Table of Contents
Advertisement
Quick Links
Electric 3000W
Blow Vac
Model:
QGBV3000
EN - ORIGINAL INSTRUCTIONS
ASSEMBLY REQUIRED
SAVE THESE INSTRUCTIONS
FOR YOUR SAFETY
Please read & understand this manual, paying attention to the safety instructions, before use.
Incorrect use of the product could put the operator or machine in danger.
Whilst every effort has been made to ensure the accuracy of information contained in this manual,
our policy of continuous improvement determines the right to make modifications without prior
warning. Images used are for illustration purposes only
1938268001 14-10-2020 v1
Advertisement
Table of Contents
Related Manuals for QGarden QGBV3000
Summary of Contents for QGarden QGBV3000
- Page 1 Electric 3000W Blow Vac Model: QGBV3000 EN - ORIGINAL INSTRUCTIONS ASSEMBLY REQUIRED SAVE THESE INSTRUCTIONS FOR YOUR SAFETY Please read & understand this manual, paying attention to the safety instructions, before use. Incorrect use of the product could put the operator or machine in danger.
- Page 2 Copyright Notice Copyright © Handy Distribution. Permission is granted to reproduce this publication for personal & educational use only. Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Handy Distribution.
-
Page 3: Specification
Weight G.W 3.6kg - N.W 3.0kg Consistent with our policy of continuous improvement, QGARDEN reserves the right to change the design and configuration of any of its products without notice or obligation. Therefore, please treat the text and images in this manual as being for illustrative purposes only. -
Page 4: Intended Use
IMPORTANT INFORMATION WARNING Read this instruction manual carefully before operating this machine. Make sure that you are familiar with the controls and properly operate the machine. Following these instructions to reduce the risk of fire, electric shock and personal injury. Keep these instructions safe for future use. -
Page 5: General Safety Instructions
GENERAL SAFETY INSTRUCTIONS It is important that you read and understand the owner’s manual and labels affixed to the machine. Learn its application and limitations as well as the specific potential hazards. Retain these instructions for future reference. The operator is responsible for following the warnings & instructions in this manual and on the product. - Page 6 STAY ALERT the working area before turning it on. Do not operate the machine while under Replace damaged, missing or failed parts the influence of drugs, alcohol, or any before using it. Warning labels carry medication that could affect your ability important information.
- Page 7 DISCONNECT IF UNATTENDED the influence of alcohol or drugs. Do not leave the machine unattended Never operate the machine whilst until it has come to a complete stop. standing on wet surfaces. This could cause Once stopped, remove the plug from the you to slip while using.
- Page 8 Should you experience an accident or disconnect the cord from the supply breakdown, immediately unplug the immediately. Do not touch the cord machine from the power source and take before disconnecting the supply. to an authorised service centre for ▪ Do not use the product if the cord is professional repair.
-
Page 9: Set Up & Preparation For Operation
SET UP & PREPARATION FOR OPERATION Follow the operating instructions step-by-step and use the pictures provided as a visual guide to easily assemble the machine. Please ensure that you have all the below necessary parts, before commencing with the assembly. To assemble, you will require a cross head (Philips) screwdriver. 1. -
Page 10: Power Connection
ASSEMBLY ASSEMBLY OF THE TUBE (Fig. 2-5) Insert the lower tube (11) into the upper tube (13) and align the screw hole (12) so that ▪ the screw can fit through. Fix the tubes together by tightening the screw. Slide the wheel bracket (17) over the lower tube as shown in figure 4. Align the screw hole ▪... -
Page 11: General Operation
GENERAL OPERATION WARNING! If the product vacuums a foreign object stop the motor! Switch the product off, disconnect it from the power supply and let it cool down. Inspect the product thoroughly for damage! Have any damage repaired before restarting! If the machine vibrates unusually during operation it may indicate that it is damaged! The product should be inspected and repaired immediately! Check the product, its power cord &... - Page 12 ADJUST THE SPEED (2) The Variable Power Switch is located on the left-hand side of the rear handle – this controls the speed for both vacuum and blow options USING AS A VACUUM Move the switch to the vac/shredder setting. Switch on and move the machine over the debris slowly.
- Page 13 WARNING! Never point the Blow Vac at people or animals and take extra care when using near sand, soil, loose gravel or shingle. EMPTYING THE COLLECTION BAG It is not necessary to remove the collection bag from the blower vac when the bag needs to be emptied.
-
Page 14: Maintenance And Storage
MAINTENANCE & STORAGE WARNING! Before carrying out any repairs or servicing work, you must ensure that the product has been disconnected from the power supply. Repairs and maintenance work other than those described within this instruction manual may be performed only by an authorised service agent. -
Page 15: Troubleshooting
TROUBLE SHOOTING WARNING! Only perform the steps described in these instructions! All further inspection, maintenance and repair work must be performed by an authorised service specialist! Contact your local authorised service dealer if the problem cannot be solved by yourself! WARNING! If the product does not perform properly, makes unusual sounds, the motor does not start or stop as described, the cutting device does not work properly, or any other irregularity... -
Page 16: Parts Diagram
PARTS DIAGRAM... - Page 17 PARTS LIST Item No Part No. Description WE137-104030373 Self-Tapping Screws WE123-301013190 Wheel Axle WE137-301013184 Wheel WE137-301019385 Wheel Bracket WE137-301019386 Lower Tube WE137-104030205A Self-Tapping Screws WE137-301019387 Upper Tube WE137-104030161 Self-Tapping Screws QG120-301019388 Right Housing WE137-103990027 Strap Buckle WE137-105990198 Strap Assembly WE137-102020039 Microswitch WE137-102080537 Speed Regulating Inner Conductor...
- Page 18 GUARANTEE QGARDEN guarantees this product against manufacturing defects. We will repair (or replace at our option), if a manufacturing defect occurs within the guarantee period as long as it has only been subjected to domestic use. For the purpose of this guarantee, domestic use means any use of the product on the property belonging to the purchaser and forming part of the garden area of his/her dwelling.
-
Page 19: Ec Declaration Of Conformity
EC DECLARATION OF CONFORMITY Conforms to European Standards Machine type: 3000-Watt Electric Garden Blow Vacuum Machine model: QGBV3000 Mass in kg: 3.0kg Voltage: 230-240V~50HZ Max. Speed: 8000-14000 min Max. Air Speed: 150-270 km/h Rated Power: 3000W Protection: Class II This machine conforms to the following EC Directives:... - Page 20 If you require assistance with regards to the contents or operation of the machine, please contact us: Tel: 01793 333212 Email: customerservice@handydistribution.co.uk Opening hours weekdays: February to October 8:30am - 5:30pm November to January 8:30am - 5:00pm (Closed Bank Holidays)
Need help?
Do you have a question about the QGBV3000 and is the answer not in the manual?
Questions and answers