Acesori PocketCast User Manual

User Guide
Thank you for choosing Acesori. Please follow
both sides of this guide to ensure proper use.
Turning on the Acesori PocketCast?
To turn on your Acesori PocketCast hold the
Play/Call button (center) until the led on the left
side of the device blinks rapid purple then blue.
Is my Acesori PocketCast on?
You'll know your Acesori PocketCast is on by
the LED indicator on the left side. When the
PocketCast is not paired with any device the
blue LED light will blink once every 5 seconds.
When the PocketCast is paired with a device the
blue LED light will blink twice every 5 seconds.
How to pair your Acesori PocketCast?
Go to settings in your personal device and find
"EB-601" under your Bluetooth devices. Acesori
PocketCast should automatically pair. Use the
included AUX cord to plug your Acesori
PocketCast into headphones, car stereo, home
receiver or any device with an AUX 3.5mm input
and you're now Bluetooth ready!
How to charge your Acesori PocketCast?
Plug the MicroUSB (small) connector into the
Acesori PocketCast and plug the USB (large)
connector into a USB power source such as a
USB wall charger, laptop or other device. A red
LED light will show when charging and the light
will go off when fully charged.