Download Print this page

Creek Company ODC CLASSIC XL Assembly Instructions

Outdoor discovery craft

Download this manual

ODC CLASSIC XL

OUTDOOR DISCOVERY CRAFT

ASSEMBLY INSTRUCTIONS

Each Pontoon consists of Nylon Cover with PVC bottom featuring integral Side Storage Pockets,

Straps and Cam-lock Buckles to secure the Frame and Main Bladder with Pro Series Valves

THIS BOX CONTAINS:

STEEL FRAME

(1) Left Frame Member

(1) Right Frame Member

(1) Plastic Seat Back

(1) Plastic Seat Bottom

(4) Seat Screws

(2) Foot Bars

(1) Rear Frame Member

(1) Mesh Cargo Deck

(1) Stripping Apron

(8) Short Snap Pins

OARS & OARLOCKS

(1) Pair 6-foot 2 piece Oars

(1) Pair Clamp-on Oarlocks

(2) Oarlock Bushings

PONTOONS

(1) Left Pontoon

(1) Right Pontoon

PUMP

Complete with a set of Adaptors

PATCH KIT

Page 1 ODC CLASSIC XL OUTDOOR DISCOVERY CRAFT ASSEMBLY INSTRUCTIONS THIS BOX CONTAINS: STEEL FRAME (1) Left Frame Member (1) Right Frame Member (1) Plastic Seat Back (1) Plastic Seat Bottom (4) Seat Screws (2) Foot Bars (1) Rear Frame Member (1) Mesh Cargo Deck...
Page 2 III. ATTACH PONTOONS TO FRAME NOTE: Always inflate the Pontoons first, before attaching to Frame. 1. Position inflated Pontoons under the Left and Right Frame Members with ODC CLASSIC XL logos oriented to the outside.The Frame Members fit around the Storage Pockets.
Page 3 Fig. 1 Frame assembly a. Cargo Deck Rear Member with Mesh Cargo Deck (assembly required) b. Left Frame Member c. Right Frame Member d. Seat Support Frame Member e. Foot Bars Motor Mount / Anchor Drop / Rod Holder Kit is available for your ODC Classix XL Visit...
Page 4 Pontoons to a dangerous level. Let some of the air out of the pontoons if the craft will be out of the water in the sun for any length of time, or if it is stored in a vehicle, etc. 4. A gain in altitude will increase the pressure in the Pontoons also. If you are taking your inflated ODC CLASSIC XL from a low elevation to a high elevation, be sure to let some of the air out of it.