Summary of Contents for Exogal Pulsar IR)
- Page 1 EXOGAL EXOGAL Pulsar (IR) User Manual 03/18/2021 5/29/2019 EXOGAL, LLC | exogal.com...
- Page 2 EXOGAL INTRODUCTION The EXOGAL Pulsar is an Infrared receiver that allows the Comet (and an Ion) to be controlled using the same Infrared remote signals as the next generation of products from EXOGAL. The Pulsar is intended to replace the original Bluetooth remotes as well as the no-longer-available iPhone and Android applications.
- Page 3 EXOGAL POSITIONING In its simplest terms, the Pulsar is an Infrared to Bluetooth Converter. EXOGAL has a defined set of Infrared codes for our products, and the Pulsar converts those IR codes to the same Bluetooth commands used by our original Bluetooth Remotes and our now-deprecated smartphone applications.
- Page 4 The Red Light will be solid. Continue to hold the Pair / Reset button until the Green light comes on (Approximately 3-4 seconds.) Once the Pulsar has been Reset, it can be re-paired with the same Comet or a different Comet by following the Pairing procedure, above. 5/29/2019 EXOGAL, LLC | exogal.com...
- Page 5 Since we use standard IR codes, you can load the Pulsar’s remote codes into any Learning Remote. You will need to consult and follow the Learning instructions for your particular remote. We’ve tested it with remotes from Universal Remote, Logitech, and Sevenhugs. 5/29/2019 EXOGAL, LLC | exogal.com...
- Page 6 EXOGAL FOR MORE INFORMATION EXOGAL, LLC 4657 Aspen Ridge Circle Eagan, MN 55122 USA exogal.com support@exogal.com 651-964-0698 Copyright Information © 2019, EXOGAL, LLC, All Rights Reserved 5/29/2019 EXOGAL, LLC | exogal.com...
Need help?
Do you have a question about the Pulsar IR) and is the answer not in the manual?
Questions and answers