Geyser SMART Quick Start Manual

Electronic control for towel radiators
SMART is an electronic thermostat for the automatic control of electric towel
radiators. By means of an internal sensor, it is capable of keeping the temperature
of the towel radiator to a desired value.
Ten different electric resistances are available in a range between 100W and
1000W.
Operative modes: Comfort, Standby/Antifreeze and 2hr Boost
with 12 or 24hr Auto Boost.
"Comfort" mode: The thermostat keeps the internal
temperature at the value set by the user.
"Standby/Antifreeze" mode: In this mode, the device is on
standby. However, as soon as the measured temperature falls
below 10°C, the control system activates the heating element, in
order to prevent the internal liquid from freezing.
"Boost" mode: In "Boost" mode, the heating element is
activated for a period of 2 hours independently of the configured
temperature. The temperature is however automatically
controlled in order not to exceed 65°C. At the end of the 2 hours
period, the device returns to "Comfort" mode.
"Auto Boost" mode: The control system enters into "Boost"
mode for 2 hours. After that, it returns to "Comfort" mode for
10, or 22 hours (period configurable by the user) and then it
enters again into "Boost" mode for 2 hours.
This sequence is repeated endlessly.
SMART is compliant with the following standards:
- Eco-design Directive for Energy-using Products,
2005/32/EC (<0,5W).
- EN 60335-1:2012
- EN 61000-3-2:2004
- EN 50366:2003
- EN 55014-1:2008
"SMART"
- EN 60335-2-30:2011
- EN 61000-3-3:1995
-EN 55014-2:1998
Unit D, Lostock Ind. Est., Lostock Lane, Bolton. Lancashire. BL6 4BL.
Tel. 01204 695387 E-mail
- EN 60335-2-43:2005
sales@geyser.co.uk
Available colors: - White (RAL 9003).
- Chrome
or aftersales@geyser.co.uk