Summary of Contents for Z-Com XG-300
- Page 1 Preliminary User manual Z-COM XG-300 IEEE 802.11g WLAN Cardbus Card User Manual Version 0.1 FCC ID: M4Y-XG-300 Page 1 of 10...
-
Page 2: Table Of Contents
2.3 FCC E ..............7 LECTRONIC MISSION OTICES 2.4 FCC R ........8 ADIO REQUENCY NTERFERENCE STATEMENT 2.5 E ..................8 XPORT RESTRICTIONS 2.6 E - EU D ..........9 UROPE ECLARATION OF ONFORMITY 3-TECHNICAL SPECIFICATIONS ...............10 FCC ID: M4Y-XG-300 Page 2 of 10... -
Page 3: 0-Introduction
(for example floppy drive, cdrom , harddisk) to install. c-after drivers are installed, restart windows d-the Z-Com WLAN icon will appear in system tray on the bottom right of the screen (see yellow arrow in fig. 01) fig, 01: Z-Com WLAN icon... - Page 4 Preliminary User manual e-double click the Z-Com WLAN icon to open the WLAN settings, the following window will appear (see fig.02) fig, 02: Z-Com WLAN settings window f-click on configuration tab and select which type of network is required (access point or Peer-to-peer mode), see fig.
- Page 5 TX rate is required (default setting is fully automatic) see fig. 04. fig, 04: WLAN tx rate setting window h-select what encryption type is required, 64 or 128 bit WEP (default setting is disabled) see fig. 05. fig, 05: WLAN encryption rate setting window FCC ID: M4Y-XG-300 Page 5 of 10...
- Page 6 (fig.06). fig, 06: WLAN network status j-click on the about tab to see the software drivers versions and MAC address (fig.07). fig, 07: WLAN driver and MAC addres information FCC ID: M4Y-XG-300 Page 6 of 10...
-
Page 7: Wireless Lan Installation Guide Lines And Authorization For Use
Any changes or modifications made to this device that are not expressly approved by Z-Com may void the user’s authority to operate the equipment. Z-Com is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution or attachment of connecting cables and equipment other than specified. -
Page 8: Fcc Radio Frequency Interference Statement
• Consult the dealer or an experienced radio/TV technician for help 2.5 Export restrictions This product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce export license. FCC ID: M4Y-XG-300 Page 8 of 10... -
Page 9: Europe - Eu Declaration Of Conformity
EU and EFTA member states. In some EU / EFTA member states some restrictions may apply. Please contact local spectrum management authorithies for further details before putting this device into operation. FCC ID: M4Y-XG-300 Page 9 of 10... -
Page 10: 3-Technical Specifications
Internal antenna integrated on the PCB (1 dBi rated gain) Operating Voltage 3.3 VDC via Cardbus slot of PC host Interface Cardbus32 Card Device driver Support Microsoft® Windows® NT, 2000, ME, and XP FCC ID: M4Y-XG-300 Page 10 of 10...