INTRODUCTION ® Thank You for Purchasing a PowerSmart Product. This manual provides information regarding the safe operation and maintenance of this product. Every effort has been made to ensure the accuracy of the ® information in this manual. PowerSmart reserves the right to change this product and specifications at any time without prior notice.
GENERAL SAFETY PROCEDURES Safety is a combination of common sense, staying alert, and knowing how your chain saw works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: Do not operate this unit until you read this instruction manual for safety, operation and maintenance instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
Page 6
• Remove or disconnect battery before servicing, cleaning or removing material from the gardening appliance. • Use only POWER SMART battery (Model#PS76018B) • Store idle appliances - When not in use, chain saw should be stored indoors in a dry, locked place out of the reach of children.
CHILD SAFETY Tragic accidents can occur if the operator is not aware of the presence of children. • Keep children out of the working area and under the watchful care of a responsible adult. • Do not allow children under the age of 14 to operate this trimmer. Children who are 14 years of age and older must read and understand the operating instructions and safety rules in this manual, and must be trained and supervised by a parent.
• Use extreme caution when cutting small-sized brush and saplings because slender material may catch the saw chain and be whipped toward you or pull you off balance. • When cutting a limb that is under tension, be alert for spring back so that you will not be struck when the tension in the wood fibers is released.
Page 9
SYMBOL NAME DESIGNATION/EXPLANATION Wet conditions alert Do not expose to rain or use in damp locations. Bar Nose Contact Avoid bar nose contact. No Hands Symbol Failure to keep your hands away from the blade will result in serious personal injury. Operate With Two Hold and operate the chain saw properly with both hands.
KNOWING YOUR CHAIN SAW Please use the illustration below to familiarize yourself with the location and function of the components that control of your chain saw. 1. Guide Bar 5. Lithium Battery Pack Knob 10. Oil Tank Cap 2. Saw Chain 6.
ASSEMBLY INSTRUCTIONS WARNING: Do not use this product if any parts on the packing list are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury.
OPERATION WARNING: Read and thoroughly understand all instructions and safety information before operating this chain saw. Failure to do so may cause serious injury or death. Do not allow anyone to operate this chain saw who has not read this manual. A chain saw can be dangerous if assembled or used improperly.
Page 13
WARNING: Follow these instructions in order to avoid injury and to reduce the risk of electric shock or fire: • Replace the battery pack or the charger immediately if the battery case or charger cord is damaged. • Verify that the battery pack is removed before inspecting, adjusting, or performing maintenance on any part of the chain saw.
CUTTING TIPS WARNING: If bar and chain become jammed, stop the motor, allow the chain to stop, and disconnect the plug from the power source before attempting to remove the obstruction. Failure to follow these steps could result in accidental starting of the lopper and cause serious personal injury. •...
Page 15
CHAIN TENSION WARNING: To avoid possible serious injury, never touch or adjust the chain while the motor is running. The saw chain is very sharp; always wear protective gloves when performing maintenance to the chain. 1. Stop the motor and remove the battery pack before adjusting the chain tension. 2.
Page 16
4. Install the saw chain in the guide slot on the guide bar (see fig.7). The chain must be so fitted over the guide bar that the cutting edges of the cutters face in the direction that the chain runs(see fig.8). Fig.8 Fig.7 5.
Page 17
NOTE: Do not use dirty, used, or otherwise contaminated lubricants. Damage may occur to the oil pump, bar, or chain. GUIDE BAR MAINTENANCE When the guide bar shows signs of wear, reverse it on the saw to distribute the wear for maximum bar life. The bar should be cleaned every day of use and checked for wear and damage.
ENVIRONMENTALLY SAFE BATTERY DISPOSAL The batteries used in this chain saw's battery pack contain the following toxic and corrosive material: LITHIUM-ION. WARNING: Toxic materials must be disposed of in a specified manner in order to prevent contamination of the environment. Before disposing of damaged or worn out Lithium-Ion battery packs, contact your local waste disposal agency for information and specific instructions.
TROUBLE SHOOTING The following form lists the common operating system with problem and solutions. Please read the form carefully and follow it. PROBLEMS POSSIBLE CAUSES SOLUTION · Attach the battery pack to the chainsaw. · The battery pack is not ·...
Page 20
PROBLEMS POSSIBLE CAUSES SOLUTION · Readjust the chain tension, following the · Insufficient chain tension. section: "CHAIN TENSION". · Dull chain. · Reinstall the saw chain, following the section: Chain saw does · Chain installed backwards. "REPLACING THE BAR AND CHAIN". ·...
Page 22
Item Stock# Description QTY Item Stock# Description 246-8J11301 plug-in pieces base 231-7J11201 brake rod 162-8J11301 plug-in pieces 344-7J11502 brake spring negative pole connect 173-8J11301 129-A0501 flat washer line positive pole connect 173-8J11302 385-7J14501 oil tank cap pole anti self-locking 293-8J10901 128-7J10104 seal ring button...
Page 23
Item Stock# Description Item Stock# Description 114-8J11301 motor 128-7J10102 seal ring 359-8J11302 small gear 216-7J10102 holder 225-8J11301 supporting plate 358-7J11201 sprocket 131-ABBD40-12 screw 130-E0701 E ring 131-ABDD05-08 screw 217-7J10301 Handle plate 130-G08 ring 131-7J13402 screw 179-7J14501 flat gasket 223-12 369-A000608 bearing 372-12 chain...
TWO (2) YEARS LIMITED WARRANTY OF POWER SMART PRODUCTS FOR HOME USE. PowerSmart (“Seller") warrants to the original purchaser only, that all PowerSmart consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase. Ninety (90) days for all Power Smart Products, if the tool is used for professional or commercial use.
Need help?
Do you have a question about the PS76122A and is the answer not in the manual?
Questions and answers