Advertisement
Thank you for purchasing this Chelsea Plug-In Wall Light.
Introduction
Please read the instructions carefully before
use to ensure safe and satisfactory operation
of this product.
Warnings
This is a Class II product and must NOT be earthed.
Please read these instructions carefully before commencing any work.
This product is designed to be fixed to a wall and connected to a mains power outlet
via the supplied 3-pin plug. Do not remove the plug and connect by other means.
IMPORTANT: Children can become entangled in loose cable. Ensure excessive loops
of cable are secured against the wall using the fittings supplied. Do not use
this product in children' s bedrooms.
Parts list
Light fitting (C)
Fixing bracket
Screws (B)
Wall plugs (A)
Small screws (E)
Retaining clips
Recommended Bulb
Recommended bulb (not included)
1 x 28W SES Eco Halogen Golf Ball bulb, or
1 x 6W SES LED Energy Efficient Golf Ball bulb
When changing a bulb, always switch off at the mains and allow the bulb to
cool before handling. Dispose of used bulbs carefully. Do not exceed the rated
power stated or use a different shape bulb from that indicated on the fitting.
01
Image
Product assembly
1
C
2
Qty
3
1
1
2
4
2
4
5
2
Select the mains power outlet you wish to connect the
A
plug to and hold the fixing bracket in place on the wall,
marking the fixing hole positions. Check there are no
mains cables or pipes beneath the wall. Drill the holes
and fit the supplied wall plugs (A) - which are suitable
for masonry only. This product is not suitable for use in
B
D
children' s bedrooms.
Fix the bracket to the wall using the supplied screws (B).
Fix the product (C) to the bracket using the supplied
screws (D).
To keep the cable tidy, this product is supplied with two
retaining clips. Decide on the cable position. Using the
retaining clips as a template mark and drill the position
of the fixing holes.
Be careful not to damage any wiring or pipes. Place the
clips around the cable and fix in place using the supplied
small screws (E).
E
Fit the recommended bulb per specifications.
Plug into a mains outlet. Your wall light is now ready
to use. Switch on using the inline switch. Note: The
shade may get hot. Only adjust after the fitting has been
switched off for ten minutes.
02
Advertisement
