Table of Contents
Advertisement
Low Battery
Automatic
Hibernation
Hibernation
Sleep
Fingerprint
■
Before entering Sleep mode, be sure to save your data.
■
Do not install or remove a memory module while the computer is in Sleep
mode. The computer or the module could be damaged.
■
Do not remove the battery pack while the computer is in Sleep mode.
Data in memory will be lost.
TOSHIBA Value Added Package
This section describes the TOSHIBA Component features pre-installed on
the computer.
TOSHIBA Power
Saver
TOSHIBA Button
Support
TOSHIBA PC
Diagnostic Tool
Satellite P200/Satellite Pro P200
Satellite P200/Satellite Pro P200 Series Features
When battery power is exhausted to the point that
computer operation cannot be continued, the
system automatically enters Hibernation Mode
and shuts itself down. You can specify the setting
in the TOSHIBA Power Saver utility.
This feature lets you turn off the power without
exiting from your software. The contents of main
memory are saved to the hard disk. When you turn
on the power again, you can continue working
right where you left off. Refer to the Turning off
the power section in Chapter 3, Getting Started,
for details.
In Sleep Mode, power to the system remains on,
but the processor and all other devices are
effectively in 'sleep mode'. When the computer is
in Sleep Mode, the Power LED flashes amber. The
computer enters Sleep Mode regardless of the
Hibernate Mode setting. Refer to the Turning off
the power section in Chapter 3, Getting Started,
for details..
Adds an additional layer of security to your files
by requiring a valid fingerprint to access them.
TOSHIBA Power Saver provides you with the
features of more various power supply
managements.
This utility controls the buttom operation of the
computer. The starting application from the
buttom can be changed.
The TOSHIBA PC Diagnostic Tool will display
basic system configuration information and allow
the functionality of some of the computer's builtin
hardware devices to be tested.
1-9
Advertisement
Table of Contents
