Download Print this page

Dolphin Walk Around Boat T Top Installation Manual

Hide thumbs

Table Of Contents

Dolphin Walk Around Boat T Top Installation

Guide

1 |

P a g e

Table of Contents

Need help?

Do you have a question about the Walk Around Boat T Top and is the answer not in the manual?

Questions and answers

Summary of Contents for Dolphin Walk Around Boat T Top

Page 1 Dolphin Walk Around Boat T Top Installation Guide P a g e...
Page 2 EXPLODED VIEW OF THE DOLPHIN WALK AROUND T TOP FOR REFERENCE P a g e...
Page 3 T Top Mounting Kit P a g e...
Page 4 STEP 1: Assemble the front and centre section of the top frame There are 3 separate pcs in the top frame, connect the lap joints with bolts to join the 3 pcs to 1 top frame. STEP 2: Attach the Side Supports to the Assemble Top Section STEP 3: Mark where you want to mount the front legs on your boat, measure the width from the left to right, then putting 2 rubber collars on the front bow, make sure the position is symmetrical.
Page 5 STEP 5: Attach the T top to the floor of the boat Place the T Top you have assemble on the marks you have made on your boat. Now you can pre drill and use the bolts and backing plates and lock in you mounting points NOTE: Check under the floor for any wires or objects before drilling holes.
Page 6 Dolphin T Tops. Dolphin is not responsible for personal injury or damage to the boat caused by the use of the t top or any transport charges or cost of installation or removal of the t top. Dolphin is not liability for direct or indirect or consequential damages resulting from delay or improper installation.
Page 7 ONLY, DO NOT Ski, tow tubes, boats or another watercraft from the tower. Watch out whilst moving under objects, such as bridges, low building and trees. Dolphin T Top Canada Distributor - Seamax Marine & Outdoor 102 – 19155 38 Ave, Surrey, BC, Canada V3Z 0Y6 www.seamaxmarine.com 1877-907-7766...