Table of Contents
Advertisement
which allows comfortable observation without stretching
forward;
-
Place inserts (4,5) in the apertures of the rail (3). The
insert
(4)
is
placed
downwards in the nearest slot on the rail of the rifle.
If there is no such a slot, the insert
with a projection (B) looking upwards. It is recommended
to place the inserts at the maximum possible distance
from each other;
-
Place clamps (6) and clamp screws (7) in the inserts
(4,5).
Tighten
screws
fixation. When necessary the excessive front part of the
rail (3) can be removed.
Adaptation has been completed and the device is ready for
use as a hunter's scope.
Dimensions of the Reticle
Adjustment of the Scope on the Rifle
Before the adjustment of the scope, objective lens should be
adjusted for a distant object (select infinity) in a dark
time with the opened cover of the objective.
with
a
projection
(B)
(4) is placed
(6,7)
in
order
to
obtain
Type
of
the
reticle
presented at the drawing.
Brightness of reticle can
be
regulated
with
switch (9). Dimensions are
given
in
meters
for
distance
100m
for
objective
64mm
NORS210)
Dimensions
brackets are given for the
objective
100mm
NORS220)
Adjustment of the scope can be performed in daytime with
the closed cover of the objective or in the twilight on the
adjusted target or on the remote point.
looking
Adjustment of the scope is performed in the following way:
-
Fix the scope on the fit of the rifle;
-
Set a panel with a target or select the point of aiming;
-
Set the rifle on the scoped machine;
-
Direct the rifle to the point of aiming by mechanical
sight (bead with a slot) (if it is possible). At this
stage
it
hard
shooting (LCTS) inserted in the barrel of the rifle,
which
indicates
position.
-
Unscrew the protective caps of the bias screws of the
aimed graticule. Turning the bias screws of the reticle
obtain the matching of reticle crosshairs with the aimed
point, set by the mechanical sight or LCTS;
-
Remove the rifle from scoped machine and take out LCTS;
-
Make
2-3
necessary corrections (for example, in order to move the
hit
point
mechanism should be turned counter clockwise, in the
is
directions Down and Left correspondingly. The aiming
point is moving upwards and rightwards);
-
Make a control shot and find out whether the aiming
toggle
point coincides with the bullet hit point. (Make the
correction again if necessary);
the
-
Set the protective caps into their places.
the
The device is ready for operation.
(NVD-
Performing
in
consideration
reticle of the device is equipped with a clicking fixer
providing the following presented characteristics:
(NVD-
Focal length of objective lens
Displacement of the reticle at the
turn of the screw for one click at
a distance of 100m
is
suitable
to
apply
geometrical
point
shots.
Having
examined
downwards
and
leftwards,
the
adjustment
it
should
that
the
displacement
Taking Photos and Video Shooting
laser
of
cold
test
of
the
barrel
the
target
make
screws
of
the
be
taken
into
mechanism
of
the
64mm
100mm
30mm
19mm
Advertisement
Table of Contents
