Powell 358-315AT2 Assembly Instructions

Thank you for purchasing this Powell product. We want to make sure it is complete and to your satisfaction. Please check
all packing material carefully for small parts which may have come loose inside the carton during shipment. Hardware
can be identified by bright red packaging, Separate, identify, and count all parts and hardware to make sure they match
with the illustrations herein and are all present. If any part(s) are missing or defective please contact Powell Customer
Service. Contact information is given at the bottom of these instructions. If you feel the item is defective beyond a
resolution with part replacements, please return this product with your receipt to the place of purchase. If purchased from
an internet retailer, please contact their customer service department. Photo's and additional information may be
requested to validate the claim. Product is not to be returned to the Powell Company under any circumstance unless
authorized by the Powell Company or an authorized dealer or representative. Thank you.
ATTENTION: SOME LETTERED PARTS LISTED ON THE INSTRUCTION SHEET MAY NOT BE IN PARTS BAG AS THEY
MAY ALREADY BE ASSEMBLED. CAREFULLY CHECK PARTS AND PACKING MATERIALS PRIOR TO ORDERING
REPLACEMENTS.
WARNING: DO NOT FULLY TIGHTEN SCREWS AND BOLTS UNTIL ALL PARTS HAVE BEEN ASSEMBLED PROPERLY.
TO PREVENT SCRATCHING THE TOP SURFACE, ASSEMBLE PRODUCT ON A SMOOTH SURFACE.
DO NOT OVER TIGHTEN SCREWS AND BOLTS.
Tools Required for assembly: Phillips Screwdriver (not provided)
ASSEMBLY INSTRUCTIONS (DGY)
MODEL NO. 358-315AT2
Made in China
Allen Wrench ( provided)
358-315CBI