Advertisement
Quick Links
Advertisement
Summary of Contents for Kogan Shangri-La SLSEATSW2GA
- Page 1 OUTDOOR SWING SEAT (2-SEATER) SLSEATSW2GA...
- Page 3 COMPONENTS Parts A1 (x2) A2 (x2) B1 (x2) B2 (x2) C (x1) D (x1) E (x2) E1 (x4) F1 (x1) F2 (x1) H (x2) I (x2) J (x1) K (x2) L (x2) M (x1) N (x1) U (x2) AA (x1) BB (x1)
- Page 4 Bolt, nut and washer sets: 35mm 25mm O M6 (x3) Z M6 (x2) 45mm 60mm P M6 (x10) Q M6 (x2) 55mm 65mm S M6 (x2) R M6 (x4) 90mm T M8 (x4)
- Page 5 ASSEMBLY Step 1: Connect the A1, A2, B1, B2, C, and D rails with the P and T nut and bolt sets. • First, connect the A1 and A2 rails together, inserting the A2 rail inside the A1 and securing with the P set •...
- Page 6 Step 2: Connect F1 and F2 rails together with the O nut and bolt set, then attach the combined F1 & F2 assembly to the B2 rails with x2 R nut and bolt sets on each end. Step 3: Create the seat assembly by connecting the arm rests (I) to the seat (J) with the Q and S nut and bolt sets.
- Page 7 Step 4: Hang the seat assembly onto the frame with the x2 springs (H). The springs will first be connected to the E1 rails of the seat assembly, then lifted and attached to the top of the frame (C and D rails). Place the seat cover (N) onto the seat assembly.
- Page 8 Step 5: Connect the E crossbeams onto the frame, using the P nut and bolt set to secure. Step 6: To begin assembling the top canopy, attach the K rails to each side of the frame assembly using the butterfly clip (U) and the O nut and bolt set.
- Page 9 Step 7: Insert the L rails into the canopy cover (M) as shown below. Step 8: Secure the canopy cover to the frame assembly, fitting L rails into K rails on each side.
- Page 10 Assembly is complete...
- Page 11 NOTES...
- Page 12 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...