One Stop Gardens 57686 Owner's Manual & Safety Instructions

Spot light low voltage

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back
of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
SPOT LIGHT
LOW VOLTAGE
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21e

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 57686 and is the answer not in the manual?

Questions and answers

Summary of Contents for One Stop Gardens 57686

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
  • Page 2 Install light securely into the for a replacement. ground prior to use. Specifications Electrical Rating 12VAC / 60Hz / 20W 12-18AWG 2-Conductor Wire Requirement Low Voltage Landscape (sold separately) Replacement Bulb Halogen 20W Max For technical questions, please call 1-888-866-5797. Page 2 Item 57686...
  • Page 3 12 AWG* 12 AWG Not Recommended (2 x 300) Watts 900W Transformer 12 AWG* 12 AWG Not Recommended (3 X 300) Watts Components Bulb Adjustment Lens Knob Cover Wire Connector Stake For technical questions, please call 1-888-866-5797. Item 57686 Page 3...
  • Page 4 At end of run, cut off excess wire. c. Remove Adjustment Knob. Adjusting Angle: d. Attach Light Fixture. a. Loosen Adjustment Knob. e. Replace Adjustment Knob. b. Adjust angle. c. Tight Adjustment Knob. Plug in power unit. For technical questions, please call 1-888-866-5797. Page 4 Item 57686...
  • Page 5 Light Fixture. have pierced both wires. 3. Faulty Light Fixture. 3. Replace Light Fixture. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service For technical questions, please call 1-888-866-5797. Item 57686 Page 5...
  • Page 6 OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Parts List and Diagram Parts List Part Description Lens Cover Lens Seal Light Board Screw Reflector Thumb Screw Spike Light Wire Connector (not shown) Halogen Bulb, 20W (not shown) For technical questions, please call 1-888-866-5797. Page 6 Item 57686...
  • Page 7 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175421173 when ordering parts. For technical questions, please call 1-888-866-5797. Item 57686 Page 7...
  • Page 8 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.

Table of Contents