MegaTec NetFeeler 2 User Manual
  1. Manuals
  2. Brands
  3. MegaTec Manuals
  4. Security Sensors
  5. NetFeeler 2
  6. User manual

MegaTec NetFeeler 2 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
N
e
t
F
e
e
l
e
r
2
N
e
t
F
e
e
l
e
r
2
User Manual
v10_9722
NetFeeler 2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NetFeeler 2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MegaTec NetFeeler 2

Summary of Contents for MegaTec NetFeeler 2

  • Page 1 User Manual v10_9722 NetFeeler 2...

  • Page 3: Table Of Contents

    4.1. Connect to NetAgent II ..........4 5. Settings ..............5 5.1. How to set RFID on NetFeeler 2 ........6 5.2. How to set Wireless Smoke/Gas sensor ...... 8 5.3. How to set Wireless Door / Window sensor ....11 5.4.

  • Page 5: Introduction

    5. Wireless InfraRed Beam detector 6. Wireless PIR sensor When an event occurs, NetFeeler 2 alarm will buzz. It can also be configured to simultaneously send an email thru NetAgent II (3-port model). When connected to NetAgent II, it can then provide environment status feedback (temperature, humidity and water presence) via the internet using a standard browser.

  • Page 6: Features

    2. Features 2. Features Able to measure variations in temperature, humidity and presence of water. Built-in radio frequency (“RF”) receiver. Support up to 7 individually ID’d wireless Door / Window sensor to detect unauthorized access. Support Wireless Smoke or Gas sensor to trigger alarm and send notification.

  • Page 7: Specifications

    ±3.0% Relative Humidity Response Time 10 Sec. Temperature -40℃ to +75℃ (-40℉ to +75℉) Range Temperature Specification Detection Range -40℃ to +70℃ Accuracy ±3℃ Response Time 10 Sec. RF Specification Detection Range 6~10 meter visible range Frequency 315MHZ Sensitivity -105dB NetFeeler 2...

  • Page 8: Application

    Applications 4. Application 4.1. Connect to NetAgent II Monitor environment data via a standard web browser Send Email when an event occurs. Powered either directly from NetAgent II. NetFeeler 2 Fig.1 Conect to NetFeeler 2...

  • Page 9: Settings

    Power Yellow LED Alarm Indicator Reset button To turn off alarm Power supply from NetAgent II RS232 port To connect to NetAgent II (3-port models) RFID Switch Used for pairing NetFeeler 2 with wireless devices (see next page) NetFeeler 2...

  • Page 10: How To Set Rfid On Netfeeler 2

    Settings 5.1. How to set RFID on NetFeeler 2 Set RFID switch 1 and 2: “on” Set RFID switch 3 to 8: “off“ Once set, the combinations will be used to pair other wireless device to NetFeeler 2. NetFeeler 2 Fig.2:...
  • Page 11 Settings NetFeeler 2 has 9 different slots to identifying wireless device. Each is allocated a default binary or DIP equivalent settings. Only the binary reference for smoke and gas sensors are fixed. The binary reference from 1 to 7 are interchangeable.

  • Page 12: How To Set Wireless Smoke/Gas Sensor

    When a leakage is detected, the gas sensor will buzz. An external 9~12V power input is required for gas sensor. To setup: 1. Open the cover (top part) of Wireless Smoke/Gas sensor to reveal two sets of DIP switches (see Fig. 3) NetFeeler 2...
  • Page 13 Settings 2. The bottom (longer) DIP switch show pins A0 to A7. This set of DIP is used to pair the wireless sensor with NetFeeler 2. Set these DIP as follows: DIP A0 to A1: set to “on” Connect pins from row H with middle pin using a jumper (see illustration below).
  • Page 14 Settings 3. The second set of DIP switch show 4 sets of pins. This set allow NetFeeler 2 to identify the type of sensor. Sensor Type DIP settings 0010 Smoke 1010 Fig.4 Wireless Smoke /Gas Sensor default Code(Top-Right) NetFeeler 2...

  • Page 15: How To Set Wireless Door / Window Sensor

    Use the Wireless Door / Window sensor to secure the front door, balcony entrance or window. When there is an intrusion, the sensor will signal NetFeeler 2 to sound an alarm. To setup: 1. Open the Door / Window sensor casing (use a flat head screwdriver and pry it open from the bottom).
  • Page 16 DIPs D0 to D3 DIPs A7 to A0 Ignore the last DIP Fig.5 Wireless Door / Window sensor DIP Switch Sensor Type DIP settings Door / Window 1011 Fig. 6 Wireless Door / Window sensor (D0 to D3) NetFeeler 2...

  • Page 17: How To Set Wireless Glass-Break Sensor

    / door. Install the sensor on the wall or ceiling next to the glass window / door. If the glass is broken, NetFeeler 2 will sound an alarm. Note: An external 9~12V power input is required.
  • Page 18 Fig. 7. 3. Set DIPs A0 to A7 the same as the wireless smoke / gas sensor in section 5.2 above. Fig.7 Wireless glass sensor DIP switch Sensor Type DIP settings Glass 0101 Fig.8 Wireless glass sensor DIP setting NetFeeler 2...

  • Page 19: How To Set Infrared Beam Detector

    If the InfraRed Beam is interrupted, the detector will sound an alarm and send a signal to NetFeeler 2. Note: An external 9~12V power input is required. To setup: 1.
  • Page 20 Settings Fig.9 InfraRed Beam detector DIP Switch Sensor Type DIP settings InfraRed Beam detector 0011 Fig.10 InfraRed Beam detector default Code(Right DIP Switch) NetFeeler 2...

  • Page 21: How To Set Pir Sensor

    PIR sensor is normally installed in important rooms, on walls, ceiling or passageway. PIR will be triggered when there is an unauthorized access and a signal will be sent to NetFeeler 2. To setup the device; 1. Open the cover by removing the screw located at the bottom of the unit.
  • Page 22 Section 5.2 “+ + - - - - - -“ 3. Set the next for DIPs 13 to 10 (from RIGHT to LEFT) “+ - - +” Fig.11 PIR DIP switch Sensor Type DIP settings 1001 Fig. 12 PIR code (from RIGHT to LEFT DIP Switch) NetFeeler 2...

Table of Contents