Advertisement
Quick Links
Zen Underwater FP-MBC100 for
Metabones Adaptors and Canon
Macro Lenses on Sony APS-C
Mirrorless Cameras
Congratulations on the purchase of your new Zen Underwater port! All Zen Underwater Ports
are constructed from the finest quality optical glass that is multicoated to eliminate flare and
reflections. All aluminum parts are hard anodized, making them rugged and impervious to
corrosion.
Care & Feeding
We recommend removing the port o-rings from the port for travel. Don't forget to replace the
port o-rings before diving!
After diving, the entire system should be soaked in fresh water to dissolve any salt crystals that
may have accumulated. After rinsing, blot any water droplets off of the port with a soft terry
towel or chamois, and allow to air dry. Water droplets left on the lens can etch the coating in
direct sunlight.
When cleaning the glass, use only a microfiber cloth. Do not use any cleaning solutions!
It is recommended that the port sealing o-rings be replaced annually.
Installation
1. Attach your camera to the camera tray and
install the camera inside your housing
without the lens attached. We recommend
keeping the body cap on your camera to
prevent dust or dirt from getting on your
sensor.
2. Install the port adaptor on the housing. It
is very important to do this before attaching
your lens.
Advertisement
Summary of Contents for Zen Underwater FP-MBC100
- Page 1 Macro Lenses on Sony APS-C Mirrorless Cameras Congratulations on the purchase of your new Zen Underwater port! All Zen Underwater Ports are constructed from the finest quality optical glass that is multicoated to eliminate flare and reflections. All aluminum parts are hard anodized, making them rugged and impervious to corrosion.
- Page 2 3. Place the focus gear on your lens and install the centering ring. The centering ring should sit around the upper edge of your lens. Please note the Canon EF-S 60mm f/2.8 Macro USM Lens does not require a centering ring. ...
- Page 3 Zen Underwater does not hold responsibility for damage of any nature to any equipment used with or placed inside this port. Zen Underwater accepts no liability for loss of any captured images or the inability to capture images even if due to the malfunctioning of this product. This warranty applies only to products purchased from authorized Zen Underwater Dealers and does not extend beyond the original retail purchaser.