Advertisement
E.
Connect one end of an Ethernet
network cable (included) to the
ETHERNET port of the Gateway .
Connect the other end to your
cable/DSL modem .
F.
Connect one end of a different
Ethernet network cable to the AUX
port of the Gateway . Connect the
other end to the Ethernet port of
your PC .
G.
Power on the cable/DSL modem .
H.
Connect the included power
adapter to the Gateway's power
port, and then plug the power
adapter into an electrical outlet .
Press the On switch to power on
the Gateway . The power LEDs on
the front panel will light up as soon
as the Gateway powers on .
I.
Power on your PC .
NOTE:
IP address automatically . For more information, refer to Windows
Help .
Make sure your PC's Ethernet adapter is set to obtain an
Ethernet Connection
Ethernet Connection
AUX Connection
AUX Connection
Power Plug
Power Plug
5
Advertisement
