Advertisement
Quick Links
Important safety instructions:
Please carefully read all instructions before assembling.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
Pre-assembly:
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
Remove all parts and hardware from box along with any plastic protective packaging.
Parts List
Item
P1
Top Frame
P2
Bottom Frame
P3
Left Side Frame
P4
Right Side Frame
P5
Back Rails
P6
Top Glass
P7
Ceramic
P8
Casters
Hardware List
Item
H1
Short Bolts Ø1/4" *1/2"
H2
Long Bolts Ø1/4" *3/4"
Countersunk Bolts Ø1/4" *3/4"
H3
H4
Flat Washers Ø1/4"
H5
Clear Plastic Pad
H6
Open Wrench
H7
Allen Wrench 4mm
ASSEMBLY INSTRUCTIONS
Description: Lionel Bar Cart
Description
Label W/ "Top"
Label W/ "Bottom"
Description
QTY
1
1
1
1
2
1
1
4
QTY
8
4
4
4
6
1
1
Page 1 of 3
Advertisement
Summary of Contents for Martha Stewart Lionel
- Page 1 ASSEMBLY INSTRUCTIONS Description: Lionel Bar Cart Important safety instructions: Please carefully read all instructions before assembling. For your safety and ease, assembly by two or more adults is recommended. Keep instructions for future use. Pre-assembly: Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
- Page 2 Assembly Procedures: Step 1. Assemble the bar cart on a flat, soft surface such as a carpet or cloth to prevent scratching the finish. 1) Insert the inserted bar on side frame (P3, P4) to back rails (P5). 2) Attach top frame (P1) to two side frame (P3, P4) using long bolts (H2), make sure the frame have a label with "Top"...
- Page 3 Step 3. 1) Turn the assembled bar cart to an upright position. 2) Make sure the assembled bar cart is level and securely tighten all bolts with Allen wrench (H5). 3) Place the clear plastic pad (H5) on the assembly top frame as shown below. 4) Gently lay the glass (P6) on the table top.