PARTS IDENTIFICATION C O N T E N T S Water Absorption Gasket Top Lid Screw Cover Inner Lid Water Inlet Valve Inner Tub PARTS IDENTIFICATION Power Cord Lint Filter SAFETY AND PRECAUTIONS Pulsator Handle Control Panel INSTALLATION & ADJUSTMENT Back Cover Body USING THE DRAIN HOSE...
SAFETY PRECAUTIONS SAFETY PRECAUTIONS Insert power plug into an earthed rated Always unplug from power supply & turn off • Do not insert hands into the machine during It is dangerous to alter the specifications or 220-240V AC power supply. water when not in use, or when cleaning or operation, even during slow speeds.
INSTALLATION & ADJUSTMENT USING THE DRAIN HOSE CHANGING THE DIRECTION OF THE DRAIN HOSE Important: Ensure inner lid is installed prior to using the machine as it won’t function without the inner lid in place. 1. Detach the drain hose and clip from the connector. Place the machine front side down on a soft mat INSTALLATION STEPS on the floor.
WATER INLET INSTALLATION PREPARATION BEFORE OPERATION PREPARATION BEFORE WASHING Use the new hose supplied together with the machine. Do not reuse old hose. 1. Insert a new flat washer into each end of the inlet hoses. Firmly insert the washers into the coupling. 1.
LOADING LAUNDRY DETERGENT GUIDE USING POWDERED DETERGENT • The machine's washing and spinning capacity refer to the largest weight of standard laundry under dry condition. Washing quantity shall be lower than the rated capacity. Dissolve powdered detergent directly in machine •...
CONTROL PANEL & FEATURES CONTROL PANEL & FEATURES PROCESS BUTTON • Press PROCESS button to select either cycles from “wash-rinse-spin”, “soak-wash-rinse-spin”, “wash”, “wash-rinse”, “rinse-spin”, “spin”.The default cycle is “wash-rinse-spin” after pressing START. PROGRAM BUTTON • Normal: For general wash • Heavy: MODE &...
Page 8
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS HEAT DRYING FUNCTION & NOTES 1. Press POWER button to power on machine. • Do not heat dry laundry stained by food, oil, animal oil, machinery oil, solvent, petrol, – Machine will be in standby mode. benzene, thinner, alcohol and etc., as these may ignite and pose a fire hazard.
CARE & CLEANING TROUBLESHOOTING AFTER EVERY WASH • Use this troubleshooting guide for a list of possible solutions if the machine does not perform as expected or malfunctions. • The machine stops automatically, and the buzzer will sound to remind you to remove the laundry or •...
Close top lid & clear fault code. Heat drying when inner tub is filled with Heat dry after spin. water. Model MWM-11 Sapphire Heat drying exceeds rated weight Open top lid & remove some clothing. Rated Voltage / Frequency 220-240V~ 50Hz...
Need help?
Do you have a question about the MWM-11 Sapphire and is the answer not in the manual?
Questions and answers