Summary of Contents for idi Aspect100HT
- Page 1 Aspect 100HT Operator Manual Aspect100HT High-Tilt Mobile Imaging Table Operator Manual Made in the USA...
-
Page 2: Table Of Contents
Aspect 100HT Operator Manual Table of Contents PRODUCT DATA ............................1 INTRODUCTION ............................2 CUSTOMER SUPPORT ........................... 3 SYMBOLS AND DATA PLATE ......................... 4 SPECIFICATIONS ............................6 ELECTROMAGNETIC COMPATIBILITY STATEMENT ..................7 SETUP ................................8 SAFETY HAZARDS............................9 SAFETY HAZARD ALERTS ..........................10 SAFETY INSTRUCTIONS .......................... -
Page 3: Product Data
Aspect 100HT Operator Manual PRODUCT DATA • Low attenuation carbon fiber tabletop • Low attenuation patient pad • Tabletop: 61cm x 203cm (24in x 80in) • Tilt: 0° (Horizontal) to 75° • Height: 81cm (32in) • Patient capacity: 238kg (525lbs) •... -
Page 4: Introduction
Aspect 100HT Operator Manual INTRODUCTION Overview This manual pertains to the specified product only. It is intended for qualified medical personnel who have been trained in the use of medical equipment. It is not designed to replace or substitute for certified training in the application of this equipment. Functional capabilities and operation of the equipment described herein which can be employed in a variety of diagnostic, therapeutic, and surgical applications. -
Page 5: Customer Support
For technical assistance, call IDI at (978) 829-0009 or send fax to (978) 829-0027. Be prepared to give the complete model and serial number found on the dataplate on the table base at the time of contact. -
Page 6: Symbols And Data Plate
Aspect 100HT Operator Manual SYMBOLS AND DATA PLATE Intertek Testing Service The system was tested and found to be in compliance with the requirements of all relevant directives and standards in effect within the European Union at the time of manufacture. Attention! Consult accompanying documents. - Page 7 Aspect 100HT Operator Manual Recycle Some of the material can be recycled rather than discarded. Not for Patient Transport. The table should not be relocated with a patient on it nor should it be used to move a patient. Do Not Sit This label is found on parts that are not designed to support the sitting weight of a patient.
-
Page 8: Specifications
Aspect 100HT Operator Manual SPECIFICATIONS Mode of Operation: For continuous operation with short time loading Duty Cycle: 10% (6 min/hr) Type of Equipment: Class I Type B (as defined by IEC 60601-1, UL 60601-1, EN 60601-1, CSA 601.1, IEC 60601-2-32:1994 and IEC 60601-2-46) Type B protection against electrical shock Complies with FDA standards Electrical:... -
Page 9: Electromagnetic Compatibility Statement
Aspect 100HT Operator Manual ELECTROMAGNETIC COMPATIBILITY STATEMENT This equipment may generate and use radio frequency energy. The equipment must be installed and used according to the manufacturer’s instructions in order to avoid radio frequency interference. If this equipment generates or receives interference: •... -
Page 10: Setup
Aspect 100HT Operator Manual SETUP Unpack No special handling is required for unpacking this equipment at the site. Conventional shipping materials are used. To remove the table from the shipping pallet, first remove the shipping brackets that secure the table to the wooden pallet using a ½”... -
Page 11: Safety Hazards
Comments and questions regarding safety should be addressed to: Customer Support Image Diagnostics, Inc. 310 Authority Drive Fitchburg, MA 01420 Or call IDI at (978) 829-0009 or send fax to (978) 829-0027. Or call toll-free at (877) 304-5434. L100-3064 REV A www.imagediagnostics.com... -
Page 12: Safety Hazard Alerts
Aspect 100HT Operator Manual SAFETY HAZARD ALERTS Alert Circumstances for Use DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation which, if not CAUTION avoided, may result in minor or moderate injury or... -
Page 13: Safety Instructions
Aspect 100HT Operator Manual SAFETY INSTRUCTIONS This symbol, when found marked on the equipment means: ”Attention, consult accompanying documentation.” This manual should be accessible to all personnel installing, operating, or servicing this equipment. Only a qualified technician may install or maintain this equipment. Only qualified persons may operate this equipment. - Page 14 Aspect 100HT Operator Manual CAUTION Do not use table for patient transport. CAUTION During operation, listen for any unusual sounds and watch for uneven operation. CAUTION Ensure that the tabletop does not contact other equipment as it moves. CAUTION Do not sit on the table top at the head of the table. CAUTION Do not place or store any containers or large items underneath the tabletop.
- Page 15 Aspect 100HT Operator Manual ACCESSORIES • PATIENT RESTRAINT STRAPS Patient Restraint Strap Set Part Number C000-0571 (Two straps 3” wide) • PATIENT HANDGRIP The patient handgrip can be quickly locked to the accessory rail in any position to suit the patient. Patient Handgrip Part Number A100-1711 (Order 2 for a complete pair)
-
Page 16: Operator Controls
Aspect 100HT Operator Manual OPERATOR CONTROLS HAND CONTROL (OPTIONAL) CAUTION Always check that the patient is secure before activating any table motion • Buttons control the tilt motion To move the tabletop, press the appropriate button and hold until the desired position is reached. - Page 17 • The two pedals control the tilt motion To move the tabletop, depress the appropriate pedal and hold until the desired position is reached. Foot Control Part Number A100-1823 Contact IDI Customer Service for individual components of foot control. L100-3064 REV A www.imagediagnostics.com...
-
Page 18: Emergency Stop Switch
Aspect 100HT Operator Manual EMERGENCY STOP SWITCH • The red emergency stop button is located on top of the control box • Pressing this button down will stop all motor movement • In the event that the hand or foot control malfunctions, the emergency stop control prohibits motion by removing power from all system components •... -
Page 19: Electric System
Aspect 100HT Operator Manual ELECTRIC SYSTEM BATTERY FUNCTION (Motorized tables) When AC power is applied, the battery will begin charging until the battery reaches full capacity. When it does, the charging will taper off. If the power goes out, the table will automatically switch to battery back-up mode. - Page 20 Aspect 100HT Operator Manual GENERAL CLEANING CAUTION After each procedure, the table should be carefully cleaned. CAUTION Avoid cleaning or getting cleaning solutions on elevating tube if possible. The disinfectant cleaners and cleaning steps on this page apply to all the parts of the table. •...
-
Page 21: Maintenance
Aspect 100HT Operator Manual APPROVED AND TESTED GENERAL PURPOSE CLEANERS • Simple Green ™ cleaner CLEANING STEPS 1. Move the tabletop into the horizontal position. 2. Lower the tabletop to the lowest position. 3. Power cord, hand control and foot control cords must be plugged in to protect the sockets. 4. - Page 22 Aspect 100HT Operator Manual L100-3064 REV A www.imagediagnostics.com...
-
Page 23: User Replacement Items
Aspect 100HT Operator Manual USER REPLACEMENT ITEMS These are easily replaced by the operator. See also previous sections for operator hand and foot controls, armboard pads and protective covers. • Standard Tabletop Pad Pads are held in place by hook and loop fasteners. Simply pull pad up gently to remove. New replacement pads are supplied with new self-adhesive fasteners installed and new mating pieces for the tabletop. -
Page 24: Disposal Of Components
Operator Manual DISPOSAL OF COMPONENTS IDI medical tables are made up of mostly steel, copper and aluminum parts which are easily recycled. It is recommended that some components be disassembled before disposal for recycling. The table below lists components typically found in IDI products but varies with model and options. -
Page 25: Warranty
3. What Is Not Covered Bv This Warranty: IDI does not warrant (i) any Product or part not sold by IDI or its authorized representatives, (ii) defects caused by failure to provide a suitable installation environment... - Page 26 Agreement. 8. Warranty Terms Subject to Change: IDI reserves the right to modify the terms and conditions of its Official Warranty from time to time. The warranty terms and conditions, and IDI's obligations under such, will be determined based on the prevailing version of IDI's Official Warranty in effect at the date of purchase order.
- Page 27 Purchaser (Dealer). 3. What Is Not Covered By This Warranty: IDI does not warrant (i) any Product or part not sold by IDI or its authorized Distributors or representatives, (ii) defects caused by failure to provide a suitable installation...
- Page 28 Aspect 100HT Operator Manual 8. Warranty Terms Subject to Change: IDI reserves the right to modify the terms and conditions of its Official Warranty from time to time. The warranty terms and conditions, and IDI's obligations under such, will be determined based on the prevailing version of IDI's Official Warranty in effect at the date of purchase order.
Need help?
Do you have a question about the Aspect100HT and is the answer not in the manual?
Questions and answers