Canon ZR600 Instruction Manual page 120

Playback
Problem
Pressing the playback button
does not start playback.
Image will not appear on the
TV screen.
Tape is running, but image will
not appear on the TV screen.
No sound from the built-in
speaker.
Memory Card Operation
Problem
Memory card cannot be
inserted.
Memory card cannot be
recorded.
Memory card cannot be
played back.
Image cannot be erased.
" " flashes red.
120
Cause
Camcorder is turned off, or is
not set to mode.
The TAPE/CARD switch is set
to CARD.
Cassette is not loaded.
Tape reached the end
(" END" flashes on the
screen).
[AV DV] is set
to [ON].
TV/VIDEO selector on the TV
is not set to VIDEO.
Video heads are dirty.
You attempted to play back or
dub copyright protected tape.
Speaker volume is turned off.
Cause
Memory card was not facing
the correct direction.
Memory card is full.
Memory card is not initialized. Initialize the memory card.
Memory card is not inserted.
File number reached
maximum value.
SD Memory Card is
protected.
Camcorder is not set to
mode.
Memory card is not inserted.
Image is protected.
SD memory card is protected. Change the position of the
Card error occurred.
Solution
Set the camcorder to
mode.
Set the TAPE/CARD switch to
TAPE.
Load a cassette.
Rewind the tape.
Set [AV DV] to [OFF].
Set the selector to VIDEO.
Clean the video heads.
Stop playback/dubbing.
Adjust the volume with the
[SPEAKER VOLUME] option.
Solution
Turn the memory card over
and reinsert it.
Replace the memory card or
erase images.
Insert a memory card.
Set [FILE NOS.] to [RESET]
and insert a new memory
card.
Change the position of the
protect switch.
Set the camcorder to
mode.
Insert a memory card.
Cancel the protection.
protect switch.
Turn off the camcorder.
Remove and reinsert the
memory card. Initialize the
memory card if flashing
persists.
30
30
17
30
75
33
113
–
32
80
80,9
4
95
80
83
80
91
80
93
80
95