BAUKER PGA230G9 Original Instruction Manual
  1. Manuals
  2. Brands
  3. BAUKER Manuals
  4. Grinder
  5. PGA230G9
  6. Original instruction manual

BAUKER PGA230G9 Original Instruction Manual

2200w angle grinder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PGA230G9
2200W ANGLE GRINDER
ORIGINAL INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PGA230G9 and is the answer not in the manual?

Questions and answers

Related Manuals for BAUKER PGA230G9

Summary of Contents for BAUKER PGA230G9

  • Page 1 PGA230G9 2200W ANGLE GRINDER ORIGINAL INSTRUCTION MANUAL...

  • Page 2: General Power Tool Safety Warnings

    GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions Important - Please read these instructions fully before starting assembly may result in electric shock, fire and/or serious injury. General Power Tool Safety Warnings Save all warnings and instructions for future reference.
  • Page 3 extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is Important - Please read these instructions fully before starting assembly unavoidable, use a residual current device (RCD) General Power Tool Safety Warnings protected supply.
  • Page 4 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off.

  • Page 5: Safety Instructions For All Operations

    SAFETY INSTRUCTIONS FOR ALL OPERATIONS: Safety Warnings Common for Grinding or Abrasive Cutting-Off Operations: a) This power tool is intended to function as a grinder or cut-off tool. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
  • Page 6 accessory, position yourself and bystanders away from the plane of the rotating accessory and run the power tool at maximum no-load speed for one minute. Damaged accessories will normally break apart during this test time. h) Wear personal protective equipment. Depending on application, use face shield, safety goggles or safety glasses.

  • Page 7: Further Safety Instructions For All Operations

    materials. Sparks could ignite these materials. p) Do not use accessories that require liquid coolants. Using water or other liquid coolants may result in electrocution or shock. q) Your hand must hold on the handle when you are working. Always use the auxiliary handles supplied with the tool.
  • Page 8 edges etc. Avoid bouncing and snagging the accessory. Corners, sharp edges or bouncing have a tendency to snag the rotating accessory and cause loss of control or kickback. e) Do not attach a saw chain woodcarving blade or toothed saw blade. Such blades create frequent kickback and loss of control.

  • Page 9: Additional Safety Instructions For Cutting-Off Operations

    ADDITIONAL SAFETY INSTRUCTIONS FOR CUTTING-OFF OPERATIONS Additional Safety Warnings Specific for Abrasive Cutting-Off Operations: a) Do not “jam” the cut-off wheel or apply excessive pressure. Do not attempt to make an excessive depth of cut. Overstressing the wheel increases the loading and susceptibility to twisting or binding of the wheel in the cut and the possibility of kickback or wheel breakage.
  • Page 10 ADDITIONAL SAFETY RULES FOR ANGLE GRINDER WARNING: Make sure the handle in the locked position before start the angle grinder. Rotating the handle is permitted only in the switched off condition SYMBOLS To reduce the risk of injury, user must read instruction manual Wear eye protection Wear ear protection Wear dust mask...
  • Page 11 EN-11...
  • Page 12 A C2 EN-12...
  • Page 13 EN-13...

  • Page 14: Component List

    14. GUARD CLAMPING LEVER (SEE FIG. A1) 15. CLAMP ADJUSTMENT NUT (SEE FIG. A1) Not all the accessories illustrated or described are included in standard delivery. TECHNICAL DATA Type PGA230G9（PGA-designation of machinery, representative of Angle Grinder) Voltage 230-240V~ 50Hz Power input...

  • Page 15: Noise Information

    Auxiliary handle Spanner We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. NOISE INFORMATION A weighted sound pressure = 93.27 dB(A) = 3.0dB(A) A weighted sound power...
  • Page 16 OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. Intended Use The machine is intended for cutting, roughing and brushing metal and stone materials without using water. For cutting metal, a special protection guard for cutting (not supplied) must be used. 1.GUARD ADJUSTMENT (SEE A1, A2) Before any work on the machine itself, pull the mains plug.
  • Page 17 Press the rear of the locking button (2) on the turnable handle and you can rotate the handle 90 to left or right. Then release the locking button. A click will be heard, when the handle is then fully locked in place.

  • Page 18: Working Hints For Your Angle Grinder

    minutes until it has cooled to normal operation temperature. 11. TO REPLACE THE BRUSHES (SEE H) Remove the screw securing the motor brush cover (see H). Remove the cover, gently lift out, and pull the spade connector free. Hold back the coil spring and slide the worn brush out of the housing, carefully release the spring.

  • Page 19: Environmental Protection

    ENVIRONMENTAL PROTECTION Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. PLUG REPLACEMENT (ONLY FOR REWIRABLE PLUG OF UK & IRELAND) If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are colored in accordance with the following code: BLUE –...

  • Page 20: Declaration Of Conformity

    Positec Power Tools (Europe) Ltd, PO Box 6242, Newbury, RG14 9LT, UK Declare that the product Electric Angle Grinder Description PGA230G9 (PGA-designation of machinery, representative of Angle Grinder) Type Function peripheral and lateral grinding Complies the following directive: 2006/42/EC, 2011/65/EU, 2014/30/EU...

Table of Contents