Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of local authorities. • If the power cord is damaged, it must be replaced by an Apuro agent or a recommended qualified technician in order to avoid a hazard. Introduction Please take a few moments to carefully read through this manual.
Telephone Helpline: 1300 225 960 (Australia) Operation Location of Controls Pusher Pusher handle Lid Release pin On/Off button Small chute Large chute Lid Release knob Cutter mouth Feet Cutting Vegetables Note: Before using the first time clean all parts that come into contact with food with warm soapy water.
Page 4
Selecting a Cutting Disc The Apuro vegetable cutter utilises various discs for different tasks. Disc Disc 4mm Grating Disc 2.5mm Julienne Disc Suitable for medium/coarse grating Suitable for thin slicing Product Code: AA077 Product Code: AA084 7mm Grating Disc 4mm Julienne Disc...
Telephone Helpline: 1300 225 960 (Australia) Changing the Cutting Disc WARNING: The blades on the cutting disc are sharp. Take care to avoid the edges when changing discs. Disconnect the appliance from the mains power supply. Turn the lid release knob anti-clockwise. Remove the food pusher (if inserted) and carefully lift the lid.
The unit is not switched on Check the unit is plugged in correctly and switched on Plug and lead are damaged Call Apuro agent or qualified technician Fuse in the plug has blown Replace the plug fuse Power supply Check power supply...
Page 7
Apuro. Every effort is made to ensure all details are correct at the time of going to press, however, Apuro reserve the right to change specifications without notice.
DECLARATION OF CONFORMITY Equipment Type Vegetable Preparation Machine Model G784-A Legislation C-Tick AS/NZ 3820 Essential Safety Requirements for Low Voltage Electrical Equipment Standards AS/NZS 61000.6.3:2007 AS/NZS 60335.1:2002+A1+A2 IEC 60335-2-64:2002+A1 Producer Name Apuro Producer Address 15 Badgally Road, Campbelltown, NSW 2560 I, the undersigned, hereby declare that the equipment specified above conforms to the above Legislation and Standard(s).
Need help?
Do you have a question about the G784-A and is the answer not in the manual?
Questions and answers