If you violate the operation rules, it would endanger personal Parameter Setting ..................... Danger ..................MPPTand PC Connection If you violate the operation rules, it would endanger personal Maintenance and Cleaning ..................Attention .................. Storageandwastedisposal Indicatingadditionaldataandinformation ..............RecoveryProcessing andWarranty ....................Technical Parameters www.everexceed.com www.everexceed.com...
Both the sides have circuitlines,disconnectboth and don'toperate within 5 minutes afterdisconnection Noself-serviceable parts inside the enclosure, don'tattempt to remove the cover . Onlyqualified persons arepermitted to operate and maintain the equipment. Onlyinsulated tools are permitted to use to reducerisksofhazard to individuals. www.everexceed.com www.everexceed.com...
Page 4
Please use components and parts recommended or sold by EverExceed. Otherwise may result in a risk of fire, electric shock, or injury to person. To avoid a risk of fire and electric shock, make sure that existing wiring is in good condition and that wire is not undersized.
Contact yourdealer if you find any damage. L * W * H:373mm*193mm*72.5mm 4.2.2 Net Weight Identifying the Charge Controller Weight:3.58kg You can identify the charge controller by the type label. The type label is in 4.2.3 Ambient Conditions the enclosure. www.everexceed.com www.everexceed.com...
PV modules. Please select PV modules with excellent function and reliable quality. Open-circuit voltage of module arrays connected in series should be less than Max. DC input Voltage (100V); operating voltage should be conformed to MPPT voltage range. www.everexceed.com www.everexceed.com...
Page 7
Like the battery bank voltage is 48V, DC output voltage range will be the range of 48V battery bank working voltage. 1) How to turn DC output turn on/off? Please find the DC output control through MPPT or Monitoring software www.everexceed.com www.everexceed.com...
13.3V , it will not in the warranty . shows 13V. When you are pressing ENTER2 button, it shows two digital battery charge current; for example: the charge current is 20.5A, it shows 20A. www.everexceed.com www.everexceed.com...
Press ENTER2 button for 3 seconds, change on mode or of f mode the LOAD indicator light changes at the same time. The LOAD indicator light, DC output on. The LOAD indicator dark, DC output off. Overview: Get into main interfaceas following ComSetting(Com):Get into setthe connection ofSolar Eagle and PC. www.everexceed.com www.everexceed.com...
Page 10
8.2.1 Connect through RS232 (COM) Step 1: Please install USB to RS232 driver software and make sure it 1)Customer's PC have RS232 connector , check the following picture had been connect with RS232. The other step is same as above. www.everexceed.com www.everexceed.com...
Attention: Liquid detergent or corrosive solvent cleaning are forbidden. Liquid is not allowed in the device. Clear the air vent passage. Carefully remove dirt with a suitable soft brush if deemed necessary . www.everexceed.com www.everexceed.com...
Need help?
Do you have a question about the Titan Series and is the answer not in the manual?
Questions and answers