Table of Contents
Advertisement
5. When charging is complete, disconnect the power adapter from the
E
camcorder. Unplug the power cable from the AC outlet, then
disconnect it from the adapter.
6. Remove the battery pack after use.
• Rotate the viewfinder upwards.
• Press and hold the BATT. RELEASE button while you slide the battery up.
Notes:
• Never connect an unspecified product to the camcorder's DC terminal.
Likewise, do not connect the power adapter to an unspecified product.
• You can find detailed notes for using the batteries in the "Notes on Using the
Batteries" (
to install the backup battery.
CA-560 Compact Power Adapter
Specifications
Power supply
Power consumption
Rated output
Operating temperature range
Dimensions
Weight
Weight and dimensions are approximate.
Errors and omissions excepted.
Subject to change without notice.
When replacement of power supply is required, please return it to the
responsible nearest Canon Service Center and please replace it with the same
type number CA-560 or equivalent.
The Adapter can be used with a power supply between 100 and 240 V AC. For
areas where 120 V AC power is not used, you will need a special plug adapter.
Contact your nearest Canon Service Center for further information.
14
122). These notes include charging and recording times and how
100–240 V AC, 50/60 Hz
34 W
9.5 V, 2.7 A DC
32°F–104°F (0°C–40°C)
2
6
× 1
× 4
in (57 × 28 × 104 mm)
1
/
1
/
1
/
4
8
8
3
/
oz (180 g) (without power cable)
8
Hide quick links:
Advertisement
Table of Contents
