Maximum Capacity - Nesco NUTRI 6 NC-60902 Instruction Manual

HOW TO ASSEMBLE
CAUTION: Make sure that the motor base is unplugged from the power source.
1. Place the motor base on a clean, dry, level surface.
2. Lower the jar or the bowl onto the motor base.
3. Rotate the container to the left as far as it will go. As the container rotates, it will
lower and the safety tabs on the bottom of the container will slide under the
safety tabs on the top of the motor base.
4. The jar or bowl can be placed on the motor base, according to the clockwise
rotation.
5. Holding the desired attachment by the shaft, place it onto the gear shaft
inside the container. Ensure that the attachment fits around the gear shaft
and that it is standing straight.
USING THE 6-BLADE ASSEMBLY
1. Holding the 6-Blade assembly by the shaft, place it onto the gear shaft inside
the jar. Ensure that the attachment fits around the gear shaft and that it is
standing straight.
2. Add the ingredients and secure the lid onto the jar.
3. Plug the power cord into the electrical outlet and select the speed to start the
machine.
HOW TO USE
1. Place the jar or bowl onto the motor base and insert the desired attachment.
(See 'HOW TO ASSEMBLE'.)
2. Add the ingredients to the container. Make sure your total of ingredients
don't go higher than the highest measured marking line on the side of the
containers.

MAXIMUM CAPACITY

Do not exceed 1700 ML marked on the jar.
INSTRUCTION FOR USE
14