Summary of Contents for RAMTONS RM/584
- Page 1 Steam Iron INSTRUCTION MANUAL MODEL: RM/584 Read this booklet thoroughly before using and save it for future reference...
-
Page 2: Important Safegards
IMPORTANT SAFEGARDS Before using the electrical appliance, basic precautions should always be followed including the following: 1. Read all instructions. 2. Before using check that the voltage of wall outlet corresponds to the one shown on the rating plate. 3. Do not use the appliance if the main cord, plug, light or the appliance itself shows visible damage, or the appliance has been dropped or is leaking. - Page 3 15. Unplug from outlet when not in use, before filling water or cleaning. 16. After each use, ensure to press down Burst steam button to drain all residual water in the iron after switching off or unplugging appliance. 17. Do not use the appliance for other than its intended use. 18.
-
Page 4: Know Your Steam Iron
KNOW YOUR STEAM IRON Top cover Cord bushing Rear cover Burst steam button Temperature light Spray button Steam knob Temperature dial Water inlet cover Water tank Nozzle Base Soleplate Burst steam button Pressing the button instantly provides a powerful shot of steam to eliminate stubborn wrinkles. Spray button Pressing the button instantly provides a fine mist spray to dampen hard-to-iron fabrics. - Page 5 Fill water into water tank through it. Make sure water should not exceed the Max level as indicated on water tank. Nozzle When pressing the spray button, water is instantly sprayed from this outlet. Cord bushing Cord bushing allows free movement of power cord in any direction with great maneuverability when ironing.
-
Page 6: Operation
piece of cloth for several minutes on the purpose of removing any residue on the soleplate. NOTE: It is normal that strange odor comes out from the unit for the first use. This will cease after a short while. OPERATION 1. -
Page 7: Other Features
splattering. 7. Burst steam can also be applied when holding the iron in a vertical position. This is useful for removing creases from hung clothes, curtains etc. Never direct steam at people! OTHER FEATURES Anti-drip function The iron will automatically stop steaming at too low temperatures to prevent water from dripping out of the soleplate. -
Page 8: After Ironing
AFTER IRONING 1. Disconnect power supply and empty the water left in water tank. 2. Reconnect into power supply and disconnect after the light goes off to make the soleplate dry. 3. Let the iron completely cool down, then wipe flakes and any other deposits on the soleplate with a damp cloth or a non-abrasive (liquid) cleaner. - Page 9 6)If the fabric consists of various kinds of fibers, you must always select the lowest ironing temperature to iron the composition of those fibers. 7)Silk and other fabrics that are likely to become shiny should be ironed on the inner side. To prevent staining, do not spray water straight on silk or other delicate fabrics.
-
Page 10: Environment Friendly Disposal
Note：“√”stands for being able to use； “×”stands for being NOT able to use. ENVIRONMENT FRIENDLY DISPOSAL You can help protect the environment! Please remember to respect the local regulations: hand non-working electrical equipments to an appropriate waste disposal center.