Advertisement
2.
Fit the end of the belt through the
slot on the back of each slider.
1.
Use the tip of the Color Me Gemz™
pen to color the facets on a gem slider
or buckle. For best results, only color
the faceted areas on each gem.
All manuals and user guides at all-guides.com
3.
Wrap the belt around your waist.
Fit the end of the belt through the
slot in the buckle base. Lower the
top of the buckle to fasten the
belt in place.
4.
Fit the pegs on the back of a
buckle into the wider end of
each slot in the buckle base.
5.
Turn the buckle to lock in place! If
you'd like to remove the buckle,
simply turn and lift the buckle
from the base.
6.
When fi nished, be sure to
replace the cap on each
Color Me Gemz™ pen.
Advertisement
