1-800-850-5914
PHOENIX, AZ USA
MODEL:
__________________________
SIZE: ____________________
DATE: ___________________
WARNING
Items subjected to fall arrest or impact
forces must be immediately removed
from service and destroyed. Any item
showing excessive wear or deterioration
should be destroyed. Inspect all equip-
ment before each use. Failure to observe
proper inspection and usage procedures
could result in injury or death. Environ-
mental hazards must be considered in
selecting the appropriate lifeline, har-
ness and lanyard. Recommendations
where chemicals, high temperature or
other unusual conditions exist may be
addressed to ULTRA-SAFE, INC. at 1-800-
850-5914.
FREE FALL CONSIDERATIONS
Free fall distance should be kept to a
minimum, and as required by OSHA, in
no case shall be greater than 6 feet. To
help assure this, tie-off attachment point
to the lifeline or anchor should be lo-
cated at or above the connection point of
the fall arrest equipment to the harness.
USER INSTRUCTION MANUAL
DESCRIPTION: LIFELINE DOUBLE LOCK SNAP ONE END
MODELS: 96805 - 5/8" x 50'
96810 - 5/8" x 100'
96815 - 5/8" x 150'
MEETS OSHA & ANSI Z359.1-07
FOR USE WITH US-5000C OR US-5000 ROPE GRABS. (SOLD SEPARATELY)
1
AND CROWN SPLICE OTHER END
96905 - 3/4" x 50'
96910 - 3/4" x 100'
96915 - 3/4" x 150'
US-5000C ROPE GRAB
Made of durable non-corrosive stainless steel, brass &
bronze. They 100% inspected for function, construction
and material integrity and are designed to meet the per-
formance requirements of ANSI Z359.1, OSHA 1926
(maximum 3 ft (0.9m) shock absorbing lanyard) and (a
permanently attached 3 ft (0.6m) lanyard) when used with
5/8" Poly-Dac or be positioned not to exceed 6' free fall.
See Instructions 313RG1
US-5000 ROPE GRABS
To be used with 5/8" or 3/4" diameter Poly-Dac rope lifeline
with minimum tensile strength of 6,100 lbs. The US-5000
is a rope grabbing device that follows a worker's movement
up and down a vertical lifeline. If a fall occurs, the rope grab
locks on the rope and absorbs much of the force generated
during the free fall.The unique energy absorbing design of
the US-5000 allows the user to use web lanyard with no
shock absorber (max length 3 feet) and still meet OSHA's
maximum force requirements.
See Instructions 313RG2
313LL