Page 1
2021/09/01 05:04 SLICE-QTC Four-Channel Temperature Controller Quick Start Guide SLICE-QTC Four-Channel Temperature Controller Quick Start Guide Model No. SLICE-QT AND SLICE-QTC Document Revision: 1 Document Last Updated on 2021/08/26 14:26 Please read Limited Warranty General Warnings and Cautions prior to operating the SLICE-QTC.
1, make connections from the SLICE-QTC to your thermal plant via the cables supplied by Vescent. Peel the shield back to make connections. The shield is connected to the SLICE-QTC case. It is not recommended to connect the shield to the plant as ground loops may be formed, degrading performance.
Ground Shield Tab. 1: Cable pinout You may purchase more cables separately from Vescent Photonics. We do not recommend making cables, but if you do so, make sure the metal sleeve (drain) is well connected to the chassis of the SLICE-QTC.
Connections to thermal plants Fig. 3: View of rear of SLICE-QTC Contact sales [at] vescent [dot] com for questions and corrections, or to request added functionality. More cables may be purchased separately Optimum Settings for Automatic Controllers, by J.G. Zieger and N. B. Nichols...