Related Manuals for ETouch ETM-G01E
Summary of Contents for ETouch ETM-G01E
- Page 1 Test Mode Normal Pre-Diabetes Type 2 Diabetes mg/dL mmol/L Body Status ETM-G01E (mg/dL) Non-Invasive Blood Glucose Meter User Manual...
- Page 2 Furthermore, there is no need to buy expensive and 5. Those with impaired thumbs or index fingers 6. Please remove battery pack to avoid battery leakage if the ETM-G01E is not in use for a long period of time short-lasting blood glucose test strips. It is an ideal **The ETM-G01E is not suitable for patients 7.
-
Page 3: Product Specifications
700hPa to 1060hPa Remarks: 6. Storage and Transport conditions: -25°C to 70°C; Source of the Blood Glucose values in the table above is from “American Diabetes Association”. eTouch 15% to 90%; 700hPa to 1060hPa 25%~0% medical Inc. adopts the values and create this table. - Page 4 After turning on the ETM-G01E blood glucose meter for the first time, you must download the companion APP phone: to your mobile phone and then use the APP to register, login, unlock and activate the ETM-G01E blood glucose meter. ETM-G01E(mg/dL) | Non-invasive Blood Glucose Meter User Manual...
- Page 5 ** Reminder: Before using the Blood Glucose b. At this point, the mobile phone will have If the ETM-G01E’s turns off and does not display Allow Blood glucose test Allow Blood glucose test Testing Help APP, your mobile phone must assist...
- Page 6 (cleaning with alcohol is Type 2 Diabetes Type 2 Diabetes recommended) to ensure the obtained values mg/dL are accurate. Body Status ETM-G01E(mg/dL) | Non-invasive Blood Glucose Meter User Manual ETM-G01E(mg/dL) | Non-invasive Blood Glucose Meter User Manual...
- Page 7 fingers. Press OK again to turn off the device Type 2 Diabetes. Press the Up and Down and end the test. keys to select and then press OK to confirm. ETM-G01E(mg/dL) | Non-invasive Blood Glucose Meter User Manual ETM-G01E(mg/dL) | Non-invasive Blood Glucose Meter User Manual...
- Page 8 131 mg/dL and press OK to confirm and turn off the device. The device is now in the Advanced Settings mode. Unit of measurement mg/dL ETM-G01E(mg/dL) | Non-invasive Blood Glucose Meter User Manual ETM-G01E(mg/dL) | Non-invasive Blood Glucose Meter User Manual...
- Page 9 Status: [Empty stomach] or [2 hours after meals], then press OK to confirm. As shown in Fig. D. Test Mode Test Mode Type 2 Diabetes mg/dL mmol/L Body Status ETM-G01E(mg/dL) | Non-invasive Blood Glucose Meter User Manual ETM-G01E(mg/dL) | Non-invasive Blood Glucose Meter User Manual...
- Page 10 Up and Down keys to select the correct value until the units digit, tens digit, ETM-G01E(mg/dL) | Non-invasive Blood Glucose Meter User Manual ETM-G01E(mg/dL) | Non-invasive Blood Glucose Meter User Manual...
- Page 11 Lightly press the 2 sensing discs on meal”, then the procedures in g. must be turn off. As shown in Fig. L. turn on the device (the ETM-G01E will be the top and the 2 sensing discs on bottom of performed two hours after a meal;...
- Page 12 “Two hours after a meal”, the screen will glucose test for the user to improve the of the ETM-G01E approximately 5 to 8 seconds display y_d (on medication) or n_d (no accuracy of blood glucose measurement.
- Page 13 50 value and the time of the test. Press OK to select the data in the memory bank. 2. The ETM-G01E meter will not turn on or the confirm and record the data. Shown as Figure below.
- Page 14 Refer to instruction download the latest user's Manufacture manual to disposal of device manual from the official eTouch medical Inc. website. The date of manufacture ETM-G01E(mg/dL) | Non-invasive Blood Glucose Meter User Manual ETM-G01E(mg/dL) | Non-invasive Blood Glucose Meter User Manual...
- Page 15 Dealer version 03.00.00...
Need help?
Do you have a question about the ETM-G01E and is the answer not in the manual?
Questions and answers