Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Planet VF-102-KIT
Summary of Contents for Planet VF-102-KIT
- Page 1 VF-102-KIT Optical Fiber Transmission System User’s Manual...
- Page 2 PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any inaccuracies or omissions that may have occurred.
- Page 3 FCC Warning This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
- Page 4 Revision Video over Optical Fiber Media Converter User’s Manual For Models: VF-102-T / VF-102-R Rev 1.0 (AUGUST 2009) Part No.: 2350-AA3700-000...
-
Page 5: Table Of Contents
Table Of Contents 1. INTRODUCTION ..............6 1.1 CHECK LIST ............... 6 1.2 INTRODUCTION TO VIDEO OVER FIBER CONVERTER ..6 1.3 KEY FEATURES ............7 1.4 PRODUCT SPECIFICATION ........... 8 2. HARDWARE DESCRIPTION ..........10 2.1 Front Panel .............. 10 2.1.1 Ports connection .......... -
Page 6: Introduction
1. INTRODUCTION 1.1 CHECK LIST Check the contents of your package for following parts: VF-102-T – Video over Fiber Media Converter / Transmitter x 1 VF-102-R – Video over Fiber Media Converter / Receiver x 1 5V / 2A Power Adapter x 2 User’s Manual x 1 If any of these pieces are missing or damaged, please contact your dealer immediately, if possible, retain the carton including... -
Page 7: Key Features
Video + Data over fiber transmission 8 bit Video Signal digital sampling PAL, NTSC, SECAM compatible 20km max. distance Data Type: RS-422 / RS-485 Standalone or work with PLANET MC-700/1500/1500R media converter chassis Compact in size, wall-mount design, easy installation... -
Page 8: Product Specification
1.4 PRODUCT SPECIFICATION Model VF-102-T VF-102-R Video Characteristic Video Channel 1 channel Bi-direction Signal Mode NTSC / PAL Video Connector Video Input/Output 75ohm / unbalanced interface Impedance Video Input/Output 1.0 Vpp / Typical peak-peak value Voltage Video Bandwidth 6.5MHz Video Digital Bit Width 8/10 bit Differential Gain (DG) <1.3% (Typical Value) - Page 9 TX: 1310nm TX: 1550nm Optical Wavelength RX: 1550nm RX: 1310nm Max. : -7 Launch Power (dBm) Min. -14 Receive Sensitivity -32dBm (dBm) Max Loss Budget 18dB Max. Input Power (dBm) Cable 9/125μm single-mode cable Hardware Specification • One Power • One for Video LED Indicators - Green, Link •...
-
Page 10: Hardware Description
2. HARDWARE DESCRIPTION 2.1 Front Panel The units’ front panel provides a simple interface monitoring the converter. There are FC fiber optical interface and VIDEO socket in the front panel. For the VF-102-T / VF-102-R which reverse data connector, the RS485/422 DATA port may be connected to the user’s interface end. -
Page 11: Rear Panel
Color Function POWER Green Power supply OK VIDEO Green Lighted when video in Green Lighted when laser in 2.2 Rear Panel The rear panel of the converter indicates one DC jack, which accepts input power with 5V DC 2A. 1. The device is a power-required device, it means, it will not work till it is powered. -
Page 12: Install The Converter
Converter and make connections to the converter. Please read the following topics and perform the procedures in the order being presented. The hardware installation of PLANET VF- 102 Media Converter do not need software configuration. To install your VF-102 on a desktop or shelf, simply complete the following steps. -
Page 13: Chassis Installation And Rack Mounting
Step 4: VF-102-R (Receiver): Connect coaxial cable from monitor / DVR to Video BNC port of the VF-102-R. Step 5: Connect the 5VDC power adapter to the VF-102-T / VF- 102-R and verify that the Power LED lights up. Step 6: Turn on the power of the analog camera / monitor; the VIDEO LED (Green) should light when all cables are attached. -
Page 14: Optional - Din-Rail Mounting
There are two DIN-Rail holes on the left side of the VF-102-T/ VF-102R that allows the converter can be easily installed with DIN-Rail mounting. The PLANET optional DIN-Rail mounting Kit – RKE-DIN can be order separately. When need to replace the... - Page 15 Step 1: screw the DIN-Rail on the VF-102-T / VF-102-R. Step 2: Lightly press the button of DIN-Rail into the track. Step 3: Check the DIN-Rail is tightly on the track. You must use the screws supplied with the mounting brackets. Damage caused to the parts by using incorrect screws would violate your warranty.
-
Page 16: Power Information
The power jack of VF-102-T / VF-102-R is with 2.5mm in the central post and required +5VDC power input. It will conform to the bundled AC-DC adapter and Planet’s Media Chassis. Should you have the issue to make the power connection, please contact your local sales representative.
Need help?
Do you have a question about the VF-102-KIT and is the answer not in the manual?
Questions and answers