Summary of Contents for Wexiodisk WD-BF90
- Page 1 BAR-FED TURN TRACK WD-BF90 & WD-BF180 (translation of the original documentation) Read the manual before use! Installation and user manual S/N: (En) Valid from: 202012 Rev.:...
-
Page 3: Table Of Contents
WD-BF90 & WD-BF180 Rev. 5.0 (202201) 1. General instructions ................ 1 1.1 Symbols used ....................2 1.2 Checking that the product and manual correspond ......... 2 1.3 EU Declaration of Conformity ................3 2. Safety instructions ................4 2.1 General information ..................4 2.2 Transport ...................... - Page 4 WD-BF90 & WD-BF180 Rev. 5.0 (202201) 4. Instructions for use ................ 16 4.1 Preparations ....................16 4.1.1 Machine design ..................17 4.2 Using the machine ..................18 4.3 After use – Cleaning ..................19 4.3.1 Incorrect cleaning methods ..............19 4.3.2 Daily cleaning ..................
-
Page 5: General Instructions
WD-BF90 & WD-BF180 Rev. 5.0 (202201) General instructions 1. General instructions Read the instructions in this manual carefully as they contain important information regarding the correct, effective and safe installation, use and servicing of the machine. Service personnel should have access to all documentation for the machine. -
Page 6: Symbols Used
WD-BF90 & WD-BF180 Rev. 5.0 (202201) General instructions 1.1 Symbols used This symbol warns of situations where a safety risk may arise. The instructions given should be followed in order to prevent injury and dangerous situations. This symbol on a machine part warns of electrical equipment. The machine must be entirely non-live during servicing, turn off the power at the power switch and if required, the switch should be locked to prevent unintentional operation. -
Page 7: Eu Declaration Of Conformity
WD-BF90 & WD-BF180 Rev. 5.0 (202201) General instructions 1.3 EU Declaration of Conformity A so-called EC Declaration of Conformity is provided on delivery of the product. CE_16_2 Contact details of the manufacturer (Wexiödisk AB, Mårdvägen 4, SE- 35245 Växjö, SWEDEN. Tel.: +46 470 771200, Fax: +46 470 23752, E-mail: wexiodisk@wexiodisk.com... -
Page 8: Safety Instructions
Warranty repairs must be performed by an authorised company. Contact an authorised service company to draw up a programme of preventive care and maintenance. For authorised service companies, please see www.wexiodisk.com or contact Wexiödisk AB. • The regular checks described in the manual must be carried out in... -
Page 9: Transport
WD-BF90 & WD-BF180 Rev. 5.0 (202201) Safety instructions 2.2 Transport Handle the equipment with care during unloading and transport to avoid the risk of it tipping over. Never lift or move the machine without using the wooden packaging to support the stand. -
Page 10: Installation
WD-BF90 & WD-BF180 Rev. 5.0 (202201) Installation 3. Installation Read the chapters GENERAL INSTRUCTIONS and SAFETY INSTRUCTIONS carefully before starting work. 3.1 General information Read these instructions carefully, as they contain important information regarding the correct installation method. The instructions should be used together with the dishwasher’s wiring diagram. -
Page 11: Transport And Storage
WD-BF90 & WD-BF180 Rev. 5.0 (202201) Installation 3.3 Transport and storage Always transport the product in an upright position. Take care during transport, as there is a risk of tipping. N.B.! The machine must not be transported without a pallet or other support. This may also result in damage. -
Page 12: Installation
WD-BF90 & WD-BF180 Rev. 5.0 (202201) Installation 3.4 Installation 3.4.1 Preparing for the installation • Check that there is sufficient room for the machine at the installation location. • Check that the installation location has the correct waste connection. 3.4.2 Positioning the machine Check the following points before the machine is placed in position: •... -
Page 13: Connection To Dishwasher
• When the WD-BF90/WD-BF180 is connected to the outfeed of a dishwasher, the outermost feed hook (D) (in the machine) on the side the WD-BF90/WD-BF180 is turned towards, must be removed. - Page 14 WD-BF90 & WD-BF180 Rev. 5.0 (202201) Installation Adjusting the turn track WDBF_12 180° turn track Adjustable foot for adjusting the height of the turn track in relation to the dishwasher. Lock nuts on the inside for adjusting the height of the stop rail.
- Page 15 WD-BF90 & WD-BF180 Rev. 5.0 (202201) Installation WDBF_11 Dishwasher Turn track Lock nut + washer Drive bar Sliding block Cover strip Screw + nut + washer Dishwasher loading cradle The turn track is set to its default settings at the factory, but may need to be adjusted according to the conditions at the place of installation.
- Page 16 WD-BF90 & WD-BF180 Rev. 5.0 (202201) Installation Fitting the feeding arm The turn track’s drive mechanism must be connected to the machine’s loading cradle once the turn track has been fitted and adjusted. WDBF_10 Stainless steel washer Turn track drive arm...
-
Page 17: Connections
WD-BF90 & WD-BF180 Rev. 5.0 (202201) Installation 3.5 Connections 3.5.1 Electrical connection Information about electrical connections can be found on the dishwasher’s wiring diagrams. The wiring diagrams are shown on the inside of the electrical cabinet door. Store the diagrams in the electrical cabinet after installation. -
Page 18: Drain/Waste Pipe Connection
WD-BF90 & WD-BF180 Rev. 5.0 (202201) Installation 3.5.2 Drain/waste pipe connection Connect the drain at (1). The drain pipe can be connected to the dishwasher drain or run to a floor drain, where it must end above the water level. The drain should be a 50 mm metal pipe if there is a risk of mechanical collision. -
Page 19: Trial Operation
WD-BF90 & WD-BF180 Rev. 5.0 (202201) Installation 3.6 Trial operation Test the turn track together with the dishwasher. Prepare the machine for a trial run by following the INSTRUCTIONS FOR USE in the machine’s user manual. The instructions describe the measures that must be taken to prepare the machine for operation. -
Page 20: Instructions For Use
WD-BF90 & WD-BF180 Rev. 5.0 (202201) Instructions for use 4. Instructions for use Read the chapters GENERAL INSTRUCTIONS and SAFETY INSTRUCTIONS carefully before starting work. This chapter describes what must be done with the turn track: • Prior to use •... -
Page 21: Machine Design
WD-BF90 & WD-BF180 Rev. 5.0 (202201) Instructions for use 4.1.1 Machine design WDBF_04 90° and 180° turn track 1=Machine powered turn track 2=Drain filter... -
Page 22: Using The Machine
WD-BF90 & WD-BF180 Rev. 5.0 (202201) Instructions for use 4.2 Using the machine The turn track must not be used as a storage area for rubbish or for storing other objects. • The turn track is powered by the dishwasher and operates when the dishwasher is feeding baskets through the machine. -
Page 23: After Use - Cleaning
WD-BF90 & WD-BF180 Rev. 5.0 (202201) Instructions for use 4.3 After use – Cleaning HACCP is a preventive inspection system which ensures that hygiene requirements are met during the washing process and cleaning of the equipment. As a result of its design, the turn track meets strict hygiene requirements. Regular, thorough cleaning is also important from a hygiene perspective. -
Page 24: Operating Problems
WD-BF90 & WD-BF180 Rev. 5.0 (202201) Instructions for use 4.3.3 Operating problems When you contact service personnel, you will need to provide the following information: • Type of equipment • Connected dishwasher serial number and installation date • A brief description of the problem. -
Page 25: Technical Information
WD-BF90 & WD-BF180 Rev. 5.0 (202201) Technical information 5. Technical information The manufacturer reserves the right to make changes to the technical data. Technical data WD-BF90 WD-BF180 Weight excl. packaging (kg) Basket size (mm) 500x500 500x500 Drain connection (mm)
Need help?
Do you have a question about the WD-BF90 and is the answer not in the manual?
Questions and answers