Table of Contents
Advertisement
Control Panel View and Functions
Temperature
& Timer
Decrease Button
Time / Temperature Control
1. In standby mode, press
cause the LEDs to flash, then set the desired temperature with the
• To set the time, press
and – buttons to set the unit to the desired time.
a. To switch between Celsius and Fahrenheit, press and hold the + and - unit at the
same time.
2. Press
one time to confirm the settings you have chosen.
• If
is pressed and no selection has been made, the mode will be exited after the
LEDs flash 10 times.
• A long press of
Start / Stop
1. In standby mode press
2. Press
again to start the timer. The temperature will display alternatively with the time every
three seconds.
3. Press
again to stop the machine and return to standby mode.
4. Hold the + and – buttons at the same time to switch between Fahrenheit and Celsius.
User Manual
to switch temperature or time setting. Press once, which should
again, which will cause the LEDs to flash again. Now use the +
will display the set time and temperature in turns.
to start the machine three
- 4 -
Display Screen
Increase Button
Start/Pause
Buttom
and
buttons.
Advertisement
Table of Contents
